search

bigtreetech / BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
2k stars 1.98k forks source link

Can anyone make 400mm x 400mm print size firmware for bigtretech skr mini e3 v3.0 32 bit? #631

Open plevia opened 2 years ago

plevia commented 2 years ago

Hello,

"Bigtretech skr mini e3 v3.0 32 bit”

BLTOUCH is already installed. I am using the "Ender Extender 400XL (for Ender 3 PRO)" kit. The print area is therefore oversized 400mm x 400mm. Can I ask you to create the firmware for me?

Best regards.

Seelenkind commented 2 years ago

x=400 y=400 and z=? Only change bedsize and add BL Touch ?

plevia commented 2 years ago

Hello Seelenkind,

First of all I want to thank you for your reply. Thank you very much.

The sizes you inquired about are as follows 400mm (X) 400mm (Y) 500mm** (Z)

For more information, please visit the following URL

https://enderextender.com/products/ender-extender-400xl-for-ender-3-pro

We plan to change the bed size, add BL Touch and install a filament sensor. If you have any other suggestions, I would be happy to add them.

Is it possible to create firmware?

Best regards.

Seelenkind commented 2 years ago

@plevia precompiled firmware.bin and config files in ZIP Download Marlin 2.0.9.3 and copy files in ZIP.file do edit / change settings

Add M412 at Start G-Code in Slicer to activate filament runout sensor

No Z Endstopp needet. BL Touch conected at probe slot (all 5 wire) , unplug Z Endstop Slot and let it empty

Ender 3 XtendeR BL Touch & Filament Sensor.zip

enable filament sensor

image

plevia commented 2 years ago

Hello Seelenkind,

I appreciate your kind response during your busy time. Since you created the firmware, I would like to purchase the main unit and try it immediately. I'm really thankful to you.

Best regards.

CptKaveman80 commented 2 years ago

Hello, I need help. I keep getting false postive on my smart filament sensor after the pruge line. ive tried eveything i can thing of. M119 im getting triggered.

louisjtime commented 2 years ago

Hello :) Were you able to install your printer correctly? your filament detector too? I will soon be in exactly this configuration: Ender 3 pro, SKR mini E3 v3.0, BTT TFT35-E3 V3.0, 400x400x500, BTT SFS V1.0 Smart Filament Sensor Detection Stuck Blocking Filament Module, BIQU Phaetus Dragon Hotend, Sensor BIQU 1M/2M HT-NTC100K thermistor temperature sensor for high temperature filament 350 degrees (MAX 360 degrees), BIQU heating tube 12V 24V 50W, no End stop and BL Touch. Can anyone help me with this homemade setup? Thank you Best regards

89coltgt commented 2 years ago

No I haven’t

On Fri, Jul 22, 2022 at 6:24 PM louisjtime @.***> wrote:

Hello :) Were you able to install your printer correctly? your filament detector too? I will soon be in exactly this configuration: Ender 3 pro, SKR mini E3 v3.0, BTT TFT35-E3 V3.0, 400x400x500, BTT SFS V1.0 Smart Filament Sensor Detection Stuck Blocking Filament Module no End stop and BL Touch. Can anyone help me with this homemade setup? Thank you Best regards

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/631#issuecomment-1192978045, or unsubscribe https://github.com/notifications/unsubscribe-auth/AY3CGIR7Y7ERX2DA67R2DULVVMNSNANCNFSM5RHOE2BQ . You are receiving this because you commented.Message ID: @.***>