Open xIExodusIx opened 1 year ago
- When I switch the printer on or press the reset button on the TFT35 V3.0.1 the TFT comes up instantly and tells me: "No printer attached!" for about 5 to 20 seconds. Which are the correct serial ports (TFT and Mainboard) and baud?
This is normal behavior. The display boots faster than the board with Marlin. Therefore, a message appears for a few seconds that the display is not connected to the printer.
If the fan FAN0, which should cool the printed product, does not turn on, you probably have a burnt switching transistor MOSFET, or pin PC6 on the CPU. You have 3 solutions:
@radek8 Thanks a lot for your help. :-)
The aliexpress link does not work, because the item is not avialble at my region! I am german.
About the issue with the FAN0, to verify that it is the MOSFET, I will change it to an other port. I hope that ist not the mainboard or the MOSFET.
How to get the mirrored writing solved, you got no clue?
You can't remap FAN0 to some random port. you can only remap it to the port that switches the Mosfet transistor. This port should also be capable of PWM regulation. If you are not going to use the electronics or extruder fan switching, you can use (remap) FAN1 or FAN2. If the transistor on FAN0 were faulty, it should not be a problem to resolder it.
https://groups.google.com/g/h-bot-and-corexy-3d-printers/c/eopGME-S3Y4
https://forum.duet3d.com/topic/14572/corexy-mirrored-and-flipped-prints
"take the motor plugged into the X driver and move it to Y, and vice versa."
Hello, did you get a working firmware? I've been struggling for 2 months and I can't get them to work together. Can you dump your files, please?
Hallo hätte eine frage hat irgendwer eine funktionierende Firmware SKR Mini E3 V3.0 & BTT TFT35 V3.0.1 auf Ender 6 oder SKR Mini E3 V2.0 den mir ist das original Board kaputt gegangen.. Ich kenn mich nicht so wirklich gut damit aus das selber zu schreiben die Firmware da ich noch recht neu bin mit 3d Druck. Vielleicht kann mir wer weiterhelfen. Lg
Hi there, I own an Ender 6 and wanted to get better prints, more and better settings and more information about printer and printings. That's why I bought the BTT SKR Mini E3 V3.0 and the BTT TFT35 V3.0.1. My issues, I have several, are:
Thanks for helping. My_Marlin_Configs.zip