Configuration.h file for BIGTREETECH-SKR-mini-E3/firmware/V2.0/firmware-bltouch-for-z-homing.bin

bigtreetech / BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.

1.97k stars 1.97k forks source link

Configuration.h file for BIGTREETECH-SKR-mini-E3/firmware/V2.0/firmware-bltouch-for-z-homing.bin #729

Open etahlee opened 1 year ago

etahlee commented 1 year ago

Hello, Is there a location for the Configuration.h and Configuration_adv.h files for the bin file: BIGTREETECH-SKR-mini-E3/firmware/V2.0/firmware-bltouch-for-z-homing.bin If not, please upload those files. Thanks. This is the only bin file that can get my BL Touch working properly on my machine. Just needed to edit a few machine parameters. Thanks.

Sergeyss2022 commented 1 year ago

https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

mac2636 commented 1 year ago

Hello, Is there a location for the Configuration.h and Configuration_adv.h files for the bin file: BIGTREETECH-SKR-mini-E3/firmware/V2.0/firmware-bltouch-for-z-homing.bin If not, please upload those files. Thanks. This is the only bin file that can get my BL Touch working properly on my machine. Just needed to edit a few machine parameters. Thanks.

Same. I just need to add the X and Y MIN_POS for my MIcro-Swiss DD.

brianvoo commented 12 months ago

Took me a while to get mine working. https://github.com/brianvoo/BIGTREETECH-SKR-MINI-E3-V3-BLTouch-ZHoming give this try.

maximusmakc commented 10 months ago

Мне потребовалось некоторое время, чтобы заставить меня работать. https://github.com/brianvoo/BIGTREETECH-SKR-MINI-E3-V3-BLTouch-ZHoming попробуйте.

Thank you, kind man! I struggled with setting up bltouch for two days. By setting //#define BLTOUCH_FORCE_SW_MODE my bltouch worked!

stiliajohny commented 7 months ago

https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

Hi @brianvoo or @Sergeyss2022 , Could you Please help me get my CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen

Sergeyss2022 commented 7 months ago

Привет! Я долго экспериментировал. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Здесь смотри. Всё вроде просто. Ошибки читай. Я в VS code делал.

сб, 25 нояб. 2023 г. в 02:12, John Stilia @.***>:

https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

Hi @brianvoo https://github.com/brianvoo or @Sergeyss2022 https://github.com/Sergeyss2022 , Could you Please help me get my CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826132075, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU . You are receiving this because you were mentioned.Message ID: @.***>

Sergeyss2022 commented 7 months ago

Вроде всё просто. translation into from Russian

сб, 25 нояб. 2023 г. в 02:21, Sergey Sanko @.***>:

Привет! Я долго экспериментировал. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Здесь смотри. Всё вроде просто. Ошибки читай. Я в VS code делал.

сб, 25 нояб. 2023 г. в 02:12, John Stilia @.***>:

https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

Hi @brianvoo https://github.com/brianvoo or @Sergeyss2022 https://github.com/Sergeyss2022 , Could you Please help me get my CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826132075, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU . You are receiving this because you were mentioned.Message ID: @.***>

Sergeyss2022 commented 7 months ago

Hi! I've been experimenting for a long time. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Look here. Everything seems to be simple. Read the mistakes. I did it in VS code. I'm not sure that it will translate correctly.

сб, 25 нояб. 2023 г. в 02:24, Sergey Sanko @.***>:

Вроде всё просто. translation into from Russian

сб, 25 нояб. 2023 г. в 02:21, Sergey Sanko @.***>:

Привет! Я долго экспериментировал. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Здесь смотри. Всё вроде просто. Ошибки читай. Я в VS code делал.

сб, 25 нояб. 2023 г. в 02:12, John Stilia @.***>:

https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

Hi @brianvoo https://github.com/brianvoo or @Sergeyss2022 https://github.com/Sergeyss2022 , Could you Please help me get my CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826132075, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU . You are receiving this because you were mentioned.Message ID: @.***>

Sergeyss2022 commented 7 months ago

сб, 25 нояб. 2023 г. в 02:24, Sergey Sanko @.***>:

Hi! I've been experimenting for a long time. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Look here. Everything seems to be simple. Read the mistakes. I did it in VS code. I'm not sure that it will translate correctly.

сб, 25 нояб. 2023 г. в 02:24, Sergey Sanko @.***>:

Вроде всё просто. translation into from Russian

сб, 25 нояб. 2023 г. в 02:21, Sergey Sanko @.***>:

Привет! Я долго экспериментировал. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Здесь смотри. Всё вроде просто. Ошибки читай. Я в VS code делал.

сб, 25 нояб. 2023 г. в 02:12, John Stilia @.***>:

https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

Hi @brianvoo https://github.com/brianvoo or @Sergeyss2022 https://github.com/Sergeyss2022 , Could you Please help me get my CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826132075, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU . You are receiving this because you were mentioned.Message ID: @.***>

stiliajohny commented 7 months ago

Hi! I've been experimenting for a long time. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Look here. Everything seems to be simple. Read the mistakes. I did it in VS code. I'm not sure that it will translate correctly. сб, 25 нояб. 2023 г. в 02:24, Sergey Sanko @.>: … Вроде всё просто. translation into from Russian сб, 25 нояб. 2023 г. в 02:21, Sergey Sanko @.>: > Привет! Я долго экспериментировал. > https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ > Здесь смотри. Всё вроде просто. Ошибки читай. Я в VS code делал. > > сб, 25 нояб. 2023 г. в 02:12, John Stilia @.>: > >> >> https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git >> >> Hi @brianvoo https://github.com/brianvoo or @Sergeyss2022 >> https://github.com/Sergeyss2022 , Could you Please help me get my >> CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen >> >> — >> Reply to this email directly, view it on GitHub >> <#729 (comment)>, >> or unsubscribe >> https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU >> . >> You are receiving this because you were mentioned.Message ID: >> @.> >> >

Thank you @Sergeyss2022

I have a CR Touch sensor Which one shall I select here ?

Sergeyss2022 commented 7 months ago

+375296595361 Watsup or Viber BLtouth

сб, 25 нояб. 2023 г. в 02:33, John Stilia @.***>:

Hi! I've been experimenting for a long time. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Look here. Everything seems to be simple. Read the mistakes. I did it in VS code. I'm not sure that it will translate correctly. сб, 25 нояб. 2023 г. в 02:24, Sergey Sanko @.

>: … <#m3405166708956397611> Вроде всё просто. translation into from Russian сб, 25 нояб. 2023 г. в 02:21, Sergey Sanko @.>: > Привет! Я долго экспериментировал. > https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/

Здесь смотри. Всё вроде просто. Ошибки читай. Я в VS code делал. > > сб, 25 нояб. 2023 г. в 02:12, John Stilia @.*>: > >> >> https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

Hi @brianvoo https://github.com/brianvoo https://github.com/brianvoo https://github.com/brianvoo or @Sergeyss2022 https://github.com/Sergeyss2022 >> https://github.com/Sergeyss2022 https://github.com/Sergeyss2022 , Could you Please help me get my >> CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen >> >> — >> Reply to this email directly, view it on GitHub >> <#729 (comment) https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826132075>, or unsubscribe >> https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU . >> You are receiving this because you were mentioned.Message ID: >> @.*>

Thank you @Sergeyss2022 https://github.com/Sergeyss2022

I have a CR Touch sensor Which one shall I select here ? image.png (view on web) https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/assets/17669235/a5bd0be8-41ce-4e64-8e20-60c3f064ec91

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826137452, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVKKWIHP2FEEEUPK3CSGCPDYGEVELAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTONBVGI . You are receiving this because you were mentioned.Message ID: @.***>

Sergeyss2022 commented 7 months ago

5 контактов в плату. Не делить. Вроде перемычку в плате ставить нужно. Печатает пока не могу показать.

сб, 25 нояб. 2023 г. в 02:36, Sergey Sanko @.***>:

+375296595361 Watsup or Viber BLtouth

сб, 25 нояб. 2023 г. в 02:33, John Stilia @.***>:

Hi! I've been experimenting for a long time. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Look here. Everything seems to be simple. Read the mistakes. I did it in VS code. I'm not sure that it will translate correctly. сб, 25 нояб. 2023 г. в 02:24, Sergey Sanko @.

>: … <#m_7421282578287096852_m3405166708956397611> Вроде всё просто. translation into from Russian сб, 25 нояб. 2023 г. в 02:21, Sergey Sanko @.>:

Привет! Я долго экспериментировал. > https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Здесь смотри. Всё вроде просто. Ошибки читай. Я в VS code делал. > > сб, 25 нояб. 2023 г. в 02:12, John Stilia @.*>: > >> >> https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

Hi @brianvoo https://github.com/brianvoo https://github.com/brianvoo https://github.com/brianvoo or @Sergeyss2022 https://github.com/Sergeyss2022 >> https://github.com/Sergeyss2022 https://github.com/Sergeyss2022 , Could you Please help me get my >> CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen >> >> — >> Reply to this email directly, view it on GitHub >> <#729 (comment) https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826132075>, or unsubscribe >> https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU . >> You are receiving this because you were mentioned.Message ID: >> @.*>

Thank you @Sergeyss2022 https://github.com/Sergeyss2022

I have a CR Touch sensor Which one shall I select here ? image.png (view on web) https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/assets/17669235/a5bd0be8-41ce-4e64-8e20-60c3f064ec91

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826137452, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVKKWIHP2FEEEUPK3CSGCPDYGEVELAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTONBVGI . You are receiving this because you were mentioned.Message ID: @.***>

Sergeyss2022 commented 7 months ago

BLTOUCH

сб, 25 нояб. 2023 г. в 02:39, Sergey Sanko @.***>:

5 контактов в плату. Не делить. Вроде перемычку в плате ставить нужно. Печатает пока не могу показать.

сб, 25 нояб. 2023 г. в 02:36, Sergey Sanko @.***>:

+375296595361 Watsup or Viber BLtouth

сб, 25 нояб. 2023 г. в 02:33, John Stilia @.***>:

Hi! I've been experimenting for a long time. https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/ Look here. Everything seems to be simple. Read the mistakes. I did it in VS code. I'm not sure that it will translate correctly. сб, 25 нояб. 2023 г. в 02:24, Sergey Sanko @.

>: … <#m_-1063253981184156524_m_7421282578287096852_m3405166708956397611> Вроде всё просто. translation into from Russian сб, 25 нояб. 2023 г. в 02:21, Sergey Sanko @.>: > Привет! Я долго экспериментировал. > https://www.makenprint.uk/3d-printing/3d-firmware-guides/marlin/consolidated-marlin-guide/

Здесь смотри. Всё вроде просто. Ошибки читай. Я в VS code делал. > > сб, 25 нояб. 2023 г. в 02:12, John Stilia @.*>: > >> >> https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git https://github.com/Sergeyss2022/BIGTREETECH-SKR-mini-E3-CRtouch-SmartfilameynBtt.git

Hi @brianvoo https://github.com/brianvoo https://github.com/brianvoo https://github.com/brianvoo or @Sergeyss2022 https://github.com/Sergeyss2022 >> https://github.com/Sergeyss2022 https://github.com/Sergeyss2022 , Could you Please help me get my >> CRTouch working with BIGTREETECH-SKR-mini-E3 on a Ender 3, LCD screen >> >> — >> Reply to this email directly, view it on GitHub >> <#729 (comment) https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826132075>, or unsubscribe >> https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU https://github.com/notifications/unsubscribe-auth/AVKKWIBYKNCMG7U2AWS3E3DYGESXBAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTEMBXGU . >> You are receiving this because you were mentioned.Message ID: >> @.*>

Thank you @Sergeyss2022 https://github.com/Sergeyss2022

I have a CR Touch sensor Which one shall I select here ? image.png (view on web) https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/assets/17669235/a5bd0be8-41ce-4e64-8e20-60c3f064ec91

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/729#issuecomment-1826137452, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVKKWIHP2FEEEUPK3CSGCPDYGEVELAVCNFSM6AAAAAAVS2I72CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGEZTONBVGI . You are receiving this because you were mentioned.Message ID: @.***>

stiliajohny commented 7 months ago

Мне потребовалось некоторое время, чтобы заставить меня работать. https://github.com/brianvoo/BIGTREETECH-SKR-MINI-E3-V3-BLTouch-ZHoming попробуйте.

Thank you, kind man! I struggled with setting up bltouch for two days. By setting //#define BLTOUCH_FORCE_SW_MODE my bltouch worked!

@maximusmakc Could you helm me get my CRTouch working I get some weird behaviour I think I need to compile my own fw but I am not sure what I am looking for