search

bigtreetech / BIGTREETECH-TFT35-V1.2

3.5inch Serial Port Touch Screen, Support Marlin/Smoothieware/etc..
40 stars 45 forks source link

V1.2.10 Doesn't Work" #11

Open BaggaShite opened 5 years ago

BaggaShite commented 5 years ago

Is this firmware ever going to be fixed or should we just throw these screens in the bin? (or return them to the seller for a refund?)

Seems they're more interested in releasing new boards than sorting the problems with existing ones.

DynaMight1124 commented 5 years ago

It's been updated now and works fine

r0xbeat commented 5 years ago

"No Printer Attatched" message on the screen after updating to V1.2.10. WTF is going on with this Firmware???

YanooStar commented 5 years ago

Same thing!

themaskedbear commented 5 years ago

I have the same problem. Someone know if there is a solution ?

boucz commented 5 years ago

same for me... "no printer attached" on screen

themaskedbear commented 5 years ago

Well,

I've found why "no printer attached" were displayed. For my part I was upgrading using the already compiled firmware for the skr v1.3 firmware provides here.

After compiling my own firmware with my configuration (ex: TMC2208 UART used) the message disappeared.

Note that, after upgrading on your own firmware, at every boot of your printer, this message will still be displayed until the boot is properly finished.

r0xbeat commented 5 years ago

After compiling my own firmware with my configuration (ex: TMC2208 UART used) the message disappeared.

Which file can be configurated?

boucz commented 5 years ago

I also recompiled the kernel (no change to any file from the git repo, as my board is a v1.2) It now runs flawlessly :) my bin file is 1Ko bigger (maybe lib version differs or anything else)

BIQU_TFT35_V1.2.10.bin.zip

boucz commented 5 years ago

for other versions (not tested) :

BIQU_TFT35_V1.0.10.bin.zip BIQU_TFT35_V1.1.10.bin.zip