Open REDxFROG opened 4 years ago
You have to connect the RS232 with the SKR 1.3. If the USB from the SKR is facing you (left bottom), you have to connect the single wire from the TFT to the TFT port on the SKR-Boards RIGHT side. The 4pin wire is going to the LEFT side of the SKR Board. If you have any question, check the pinout in the manual of the tft35 v2.0
Which port to use on the TFT35 v2.0 ? "SWD" or "RS32" ? The others don't fit.
And this cable goes to "TFT" on the SKR1.3, right?
"Power" is not needed?