search

bigtreetech / BIGTREETECH-TFT35-V2.0

BIGTREETECH TFT35-V2.0 is a medium size and ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD.
38 stars 13 forks source link

TFT35 V2.0 + ESP01S Wifi #7

Open Doom6666 opened 4 years ago

Doom6666 commented 4 years ago

Hi, I have a TFT35 V2.0 with ESP01S attached. I am connected to my home WiFi. However, it is not working to transfer files to the SD card located in TFT35. Can anyone help? Thanks

grego1981 commented 4 years ago

As mentioned in a another issue, this is not implemented yet. How did you connect it to the WiFi?

Doom6666 commented 4 years ago

Jak je uvedeno v jiném čísle , toto ještě není implementováno. Jak jste se připojili k WiFi?

I uploaded ESP3D firmware to ESP01S and inserted ESP3-WebUI with configuration as CLIENT ... inserted into slot on TFT35 V2.0. I can control the printer via WiFi, but I still cannot upload files to SD. I have V2.0.23 firmware on TFT35 V2.0...

luc-github commented 4 years ago

if your TFT is connected using serial (touch mode) ESP3D has no way to access the TFT SD card reader, it can only access to printer SD card if any

dineshvyas commented 4 years ago

Jak je uvedeno v jiném čísle , toto ještě není implementováno. Jak jste se připojili k WiFi?

I uploaded ESP3D firmware to ESP01S and inserted ESP3-WebUI with configuration as CLIENT ... inserted into slot on TFT35 V2.0. I can control the printer via WiFi, but I still cannot upload files to SD. I have V2.0.23 firmware on TFT35 V2.0...

Can you post step by step instructions?

TimboNZ76 commented 4 years ago

Any progress on this situation ie upgrades etc?

acidcoolxxx commented 4 years ago

Have the same issue. For now I use the Onboard option. Change #define SDCARD_CONNECTION LCD to #define SDCARD_CONNECTION ONBOARD and you have at least access to it over wifi. Use M22 to unmount the SDcard so it will be displayed again on your PC.

dineshvyas commented 4 years ago

It is easier than I could believe, configured with hit and try. Working! wifi with SKR_PRO_1.1.

epicurean70 commented 4 years ago

IS esp01s supported on the tft35 v2 now?

Mikomanus commented 4 years ago

yep it is. But i still can't get the SD card working over wifi.

luc-github commented 4 years ago

Local tft SD card is not yet supported in ESP3D

baccula commented 3 years ago

Any plans to implement local SD access? My printer board doesn't have SD so I have to use the TFT slot.