Open cyburrs opened 3 years ago
I am sorry. I overlooked my involvement
there is a problem with the description of the connector in the V1.2 board version
Any idea about the V2.0 board? Is it the same?
I had the same problem, but after a while I discovered that the connector was wrong from BLTouch.
The wires, in my case, came out of the BLTouch as White/Black/Yellow/Red/Blue all down to the connector, but the connector suddenly switched Red and Blue so the connector was White/Black and Yellow/Blue/Red. So I had to stick some Male to Female Dupont Wires into the connector und right this mistake.
So please make sure that the wires are the right order.
This is the same issue I read about in closed ticket #75 but there was no resolution for being able to add the BL Touch back into the system. Any new information available?
TFT-35 E3 V3.0 goes blank after 5 seconds of turn on of an Ender 3 pro with BIGTREETECH SKR Mini E3 V2.0 #75
https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0/issues/75
I have the exact same problem. I bought both the TFT 3.5 V3 and the SKR Mini E3 V2.0 just within the last two weeks. Updated the firmware to Ender 5 with BLTouch. Quits after 5 seconds. Removed the BLT touch and it works. Now how do I get my BL Touch to work?