Closed Whiskaya closed 4 years ago
Hi.
This issue is fixed in the latest version of the TFT firmware.
Please try and let us know if you need any help
It came with V3.0.26 from factory, and already had some configuration changes like Marlin mode not showing the title bar.
Still, had some problems/bugs, so I downloaded fresh firmware from Github. It was the same V3.0.26. This was 2 weeks ago.
Today I noticed the firmware was re-uploaded 8 days ago. Is that file corrected, even though it is the same version number?
Forget the version number, use the v26 from today and enjoy even the new image preview when using Cura as the slicer.
It is great and your problem will also be fixed.
Happy printing
Whiskaya notifications@github.com schrieb am Di. 21. Juli 2020 um 14:39:
It came with V3.0.26 from factory, and already had some configuration changes like Marlin mode not showing the title bar.
Still, had some problems/bugs, so I downloaded fresh firmware from Github. It was the same V3.0.26. This was 2 weeks ago.
Today I noticed the firmware was re-uploaded 8 days ago. Is that file corrected, even though it is the same version number?
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0/issues/72#issuecomment-661831452, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM6XKZDZAVDW2I6OFTZFFZ3R4WD7XANCNFSM4PCTZH4Q .
Indeed, it's working fine so far. Thanks!
Also for me.
👍🏻
Whiskaya notifications@github.com schrieb am Mi. 22. Juli 2020 um 01:47:
Indeed, it's working fine so far. Thanks!
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0/issues/72#issuecomment-662162514, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM6XKZGB7FY2QLU3NYLSIXTR4YSI3ANCNFSM4PCTZH4Q .
I've had several instances when, while tuning speed or flow, suddenly the numbers go haywire and get scrambled (ONLY the flow/speed numbers), jumping randomly. A few seconds later, the nozzle stops and stays hot, but doesn't move anymore. Can't pause/resume, only stop print and start everything from the top. All of this is in TFT mode. Haven't been able to try it in Marlin mode yet, as the screen gets scrambled as soon as I move the steppers or start preheating.
Ender 5 TFT35 E3 V3.0 SKR Mini E3 V2.0 Stock PSU