search

bigtreetech / BIGTREETECH-TMC5161-V1.0

16 stars 1 forks source link

TMC5161 V1.0 don't move, but 5160 V1.2 do #3

Open einencool opened 4 years ago

einencool commented 4 years ago

Hello, first, sorry for my bad english, but I've some issues i don't understand.

I've got a 3d-Printer with the BTT SKR Pro V1.1 I've installed 4x TMC5161 and configured them as followed:

Configuration.h all Stepper driver types as TMC5160

Configuration_adv.h current for xyz 1000 microsteps 16 Rsense 0.060 Chain Pos 0 TMC Debug enabled TMC_USE_SW_SPI enabled

when I put M122 in Terminal I get answers from all drivers, everything is fine. But when I try to move the axis it will only move for 1-2 mm and then stop. There is no Error message or something like this...

When I put in some 5160 V1.2 with the same Config but reversed direction and Rsense 0.075 it works like it should.

I have 4 5161 V1.0, but none of them is working fine... Can you please tell me, what I'm doing wrong?

Thank you in advance :-) Greets Chris

HalconTec commented 4 years ago

Hello, I have the same problem, we are hoping an answer from the technical service. Thank you in advance and I wish the whole Bigtreetech team a happy new year 2020. Regards Dan.

Config: SKR Pro 1.1 4 x 5161 V1.0

einencool commented 4 years ago

Yesterday I tested it with a skr 1.4 Turbo with the same problem, but I don’t think that we’ll get help in this place because here is nobody from BTT to help us...

GeminiServer commented 4 years ago

Same here... (tmc5161 + skr 1.4 turbo) i wrote the support a mail. If they not respond, i send them all back.

einencool commented 4 years ago

In my opinion you should send them back if you have the possibility !! I was trying to long so that I can‘t send them back, but it‘s wasted time and money...

GeminiServer commented 4 years ago

Got it running - more info here: https://github.com/MarlinFirmware/Marlin/issues/16365#issuecomment-584665498