search

bigtreetech / BIGTREETECH-TouchScreenFirmware

support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
GNU General Public License v3.0
1.3k stars 1.65k forks source link

BTT SKR e3 mini v2.0 and BTT TFT24 v1.1 #2037

Closed Vilunki15 closed 3 years ago

Vilunki15 commented 3 years ago

Hi! I'd want to buy BTT SKR e3 mini v2.0 and BTT TFT24 v1.1. But I'm not sure to do they work with each other? I'd want to use marlin and TFT mode. image

oldman4U commented 3 years ago

And you have access to youtube and Facebook?

oldman4U commented 3 years ago

BTW, the TFT24 does not really fit the Ender 3 but the TFT35 E3 v3 is a 1:1 replacement and has a illuminated encoder and many features more.

Vilunki15 commented 3 years ago

And you have access to youtube and Facebook?

Yes!

Vilunki15 commented 3 years ago

BTW, the TFT24 does not really fit the Ender 3 but the TFT35 E3 v3 is a 1:1 replacement and has a illuminated encoder and many features more.

I know, but it's two times expensive. And I have already a case for that tft24.

oldman4U commented 3 years ago

Then please check the options there.

This here is not a user group but a repository dedicated to the firmware of the TFT touchscreens offered by BTT. Once you got your BTT TFT, you can download free firmware for it from here and report bugs and ask for new features. Does not matter if it is a BTT TFT24 or BTT TFT70.

It is a one time investment and the TFT24 is tiny and the quality of the display is worse compared to the much newer TFT35 E3. Your choice.

Please help the community and close this ticket. Thank you

radek8 commented 3 years ago

attention! Wrong combination. The SKR Mini and TFT 24 1.1 have different connectors.

radek8 commented 3 years ago

You'd have to use a Y cable.

oldman4U commented 3 years ago

@radek8 Do we expect users starting a new ticket to read The Read me before posting a New Issue! #1047. It is about the E3 mainboard and the encoder wheel changing the print speed in touch mode.

radek8 commented 3 years ago

@oldman4U I'm not talking about an encoder problem. The TFT has EXP1 and EXP2 connectors SKR E3 mini has an EXP3 connector they cannot be interconnected without Y reduction. It used to be in the readme on the front page, but you recently deleted it.

oldman4U commented 3 years ago

I know you need a y cable. But I talk about the encoder wheel changing the print speed in case the TFT is connected to an E3 Mainboard.

When did I remove this information. This must have been by mistake😔

radek8 commented 3 years ago

This has been addressed several times https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware/issues/700

radek8 commented 3 years ago

Sorry, the info is still there, but I would think that there used to be a picture :)

radek8 commented 3 years ago

@Vilunki15 In conclusion, I can say that I do not recommend this combination TFT and SKR

oldman4U commented 3 years ago

I love my TFT35 E3 and SKR E3 DIP.

github-actions[bot] commented 6 months ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.