[BUG] The "chamber" temperature is not updated in "RRF" mode.

bigtreetech / BIGTREETECH-TouchScreenFirmware

support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70

GNU General Public License v3.0

1.31k stars 1.65k forks source link

[BUG] The "chamber" temperature is not updated in "RRF" mode. #2659

Closed langyaWang22 closed 1 year ago

langyaWang22 commented 1 year ago

The "chamber" temperature is not updated in "RRF" mode.The "chamber" will be updated only when the screen is turned on or restarted. TFT Firmware Version: Dec-30-2022 master - BIQU_TFT35_V1.2.27.x.bin

radek8 commented 1 year ago

This will probably be a communication problem with RRF. This is the query for @Subcircuit , @pfn , @bttguy,

KirkBigelow commented 1 year ago

Have an Octopus Pro 1.0.1 and GD TFT50 V3.0.1. Have similar issue with display not updating with RRF config. Have run through all the possible serial mode with modes S0 S2 showing the printer is connected at baud rate of 57600. RRF firmware 3.4.5_102 and TFT firmware V3.0.27.x. It seems to communicate only after a reset and then gets lost. The TFT terminal will not do anything either. The Octopus Pro seems to be work fine with the limited test done so far. Octopus Wifi interface and Duet Web page dashboard is as expected as well as the Octupus command USB interface.

stale[bot] commented 1 year ago

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

github-actions[bot] commented 7 months ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.