Closed lumpy1965 closed 3 years ago
cwizard
commented
4 years ago Can confirm this happened to a user I was helping, but cannot explain why. We used identical firmware and I was not able to reproduce this behavior from my TFT E3v3 when printing from the USB slot. Printing from the full size SD slot on the TFT works as expected.
Mowhok
commented
4 years ago how to fix your problem: go into you touch mode. into settings and enable start print and end print gcode. then you can print
cwizard
commented
4 years ago how to fix your problem: go into you touch mode. into settings and enable start print and end print gcode. then you can print
This makes little sense, because the same file printed from the SD slot on the TFT prints correctly. Expected behavior from start/end GCODE settings are that they are additional. Several users have reported this behavior in the BIGTREE user group on Facebook.
oldman4U
commented
4 years ago What is the status of the reported issue. Please let us know
oldman4U
commented
4 years ago Please help the community and close the ticket once you do not need it anymore. Thank you
stale[bot]
commented
3 years ago This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
github-actions[bot]
commented
7 months ago This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.
just installed a SKR Mini E3 v1.2 & TFT35 E3 v3, both updated with latest firmware from github.
no Bltouch installed.
the gcode prints fine from the sd card slot, but same file wont print from the usb stick hanging off the side of the screen, as soon as i try the screen flashes over n over with "cold extrusion prevention" error, and then the "X - Y" axis does a jig in middle of the bed then X goes to home.
thoughts?