I am facing a crashing/rebooting issue... not sure what causes it but the B1 SE Plus will randomly crash/reboot about ~1.5 minutes after turning on (or about halfway through the Auto Bed Leveling sequence)
Curiously enough, the crashing/rebooting doesn't happen on the first boot after the flash. If I press the reset button or power cycle the printer after the first boot on a fresh flash cycle, it will start the crashing/rebooting again. I am running the latest IDEX_seperate_z firmware.
I will try testing the combined z IDEX firmware and see if that changes anything
I am facing a crashing/rebooting issue... not sure what causes it but the B1 SE Plus will randomly crash/reboot about ~1.5 minutes after turning on (or about halfway through the Auto Bed Leveling sequence)
Curiously enough, the crashing/rebooting doesn't happen on the first boot after the flash. If I press the reset button or power cycle the printer after the first boot on a fresh flash cycle, it will start the crashing/rebooting again. I am running the latest IDEX_seperate_z firmware.
I will try testing the combined z IDEX firmware and see if that changes anything