BIQU B1 HEATING FAILED - Githubissues

bigtreetech / BIQU-B1

147 stars 105 forks source link

BIQU B1 HEATING FAILED #32

Open ijaxbr opened 3 years ago

ijaxbr commented 3 years ago

Hi, Recently, i buyed a biqu B1....and after my second print, I received the message:

" Heating Failed, system stopped! Heater_ID:0"

Is it a hardware or a software problem?

I appreciate any help to start troubleshooting...

Thanks!

Bigsmooth68 commented 3 years ago

Hi, Most probably hardware. Check the connectivity. Is it before or after bed warm up ? In other word, is it bed or head themistance.

ijaxbr commented 3 years ago

Thank you for your help! I disassembled the extruder hub and checked the wiring....it was a little twisted...(in my opinion)...then i checked the wiring inside the printer (MB, POWER SUPLY....) Once the cables was reconnected, the extruder warmed normally.....