bigtreetech / BTT-E3-RRF

57 stars 39 forks source link

Ender3 X & Y axis moving inverted #33

Open Olliftw opened 2 years ago

Olliftw commented 2 years ago

So ive upgraded to the BTT E3 v1.1 board. Installee latest reprap firmware, set up the wdc interface and got everything up and running. everything works just fine except for homing, my x and y axis move the wrong direction with the result that they cannot home. Z axis is going correct up and down. Im pretty new to this firmWare, ive tried editing with the online configurator to make the axis go backwards/forwards but without any result. while setting up the firmware i used the ender3 preset. Any tips? I would realy like to use this firmxware with the webinterface everything works except i cant home all because of this issue.

jaysuk commented 2 years ago

join us on discord at https://discord.gg/uS97Qs7 and we'll be able to help you get sorted

Thanks,

Jay

On Thu, 7 Apr 2022 at 13:30, Olliftw @.***> wrote:

So ive upgraded to the BTT E3 v1.1 board. Installee latest reprap firmware, set up the wdc interface and got everything up and running. everything works just fine except for homing, my x and y axis move the wrong direction with the result that they cannot home. Z axis is going correct up and down. Im pretty new to this firmWare, ive tried editing with the online configurator to make the axis go backwards/forwards but without any result. while setting up the firmware i used the ender3 preset. Any tips? I would realy like to use this firmxware with the webinterface everything works except i cant home all because of this issue.

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BTT-E3-RRF/issues/33, or unsubscribe https://github.com/notifications/unsubscribe-auth/AATUSBVKDTPV7MWUT4GQZR3VD3IO3ANCNFSM5SZG2T7Q . You are receiving this because you are subscribed to this thread.Message ID: @.***>

Olliftw commented 2 years ago

I will later tonight. Thx