search

bigtreetech / BTT-SD-TF-Cloud-V1.0

BTT SD/TF Cloud V1.0 is launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., which is a module for wireless file transmission between the master computer and the 3D printer, so that you can get rid of the constraint of plugging SD card.
70 stars 23 forks source link

if it works as wifi it doesn't read me the micro sd #23

Open andrub72 opened 3 years ago

andrub72 commented 3 years ago

ho I configured the micro sd via micro usb to connect to the wifi network and it connects. When I connect the module to my 3v2 ender 3D printer, it manages to connect to the wifi network, but the printer does not read the micro sd to me. The mirco sd works because if I insert it into the printer it works. How can I make the printer read it when it is inside the wifi module

N16htm4r3 commented 3 years ago

I have the same problem, did you find the solution. -Thanks

Lufibohoc commented 3 years ago

It has worked perfectly well for me so far. I wanted to put a larger size on the SD card than would fit on it. You gave an error message. It doesn't work now. I tried 3 SD cards. When I put it in, it reads the files. When you connect to wifi, it says you can't see the SD card. Can I update the wifi unit software? Thx!

andrub72 commented 3 years ago

I found that with the board of the ender3 it doesn't work, the motherboard is equipped only with the SDIO interface, while this module has only the SP interface!

Lufibohoc commented 3 years ago

I have an SKR 1.4 Turbo motherboard in my printer. So far, it has worked perfectly. You are now reading the SD card, but only until you are connected to wifi. When connected to wifi it prints that it does not see the sd card.

N16htm4r3 commented 3 years ago

I found that with the board of the ender3 it doesn't work, the motherboard is equipped only with the SDIO interface, while this module has only the SP interface!

I guess I will not use this device as a result. :( Thanks everyone.

andrub72 commented 3 years ago

you cannot ask the module manufacturer for a modification to support the interface as well SDIO !

madjx commented 2 years ago

I have the same problem, it seems to be really common (see other issues)

Asdf-0123 commented 2 years ago

Hardware error resolution: https://www.reddit.com/r/SidewinderX1/comments/k4jqt5/wireless_printing_with_a_bigtreetech_tf_cloud_on/