search

bigtreetech / CB1

OS System image for CB1
353 stars 57 forks source link

Eth0 is not working #32

Open blandown opened 2 years ago

blandown commented 2 years ago

Hi, I installed the latest minimal version and tried to access using ethernet cable, but didn't work.

image

When plugging in the ethernet cable, the leds do not light up.

BeigeAnimal commented 2 years ago

Known issue read the release page

billru05 commented 2 years ago

Here is the Snip---V2.1.2 The ethernet driver of this version is still under debugging, You can use the kernel4.9 image first if you prefer to use the Ethernet rather than WiFi---

looxonline commented 1 year ago

Fixed with a new release coming in about two days.

creatron commented 1 year ago

The ETH fix released works, but it send zillions of messages to /var/log/kern.log. Please remove the logs xxx phydev->speed=100 full

AChorostian commented 1 year ago

It's still not fixed in 2.3.1

looxonline commented 1 year ago

It's still not fixed in 2.3.1

It was fixed but there is a new version of the SOC that needs a slight tweak to the driver. A new image will be released soon with the updated driver.

AChorostian commented 1 year ago

Is there available any OS that supports ethernet port on Manta M8P v1.1 ? I just tried Hurakan_Debian11_Mainsail_kernel4.9_20220912 Ethernet again doesn't work.

looxonline commented 1 year ago

Is there available any OS that supports ethernet port on Manta M8P v1.1 ? I just tried Hurakan_Debian11_Mainsail_kernel4.9_20220912 Ethernet again doesn't work.

As I mentioned, the updated OS will be coming in a few days.