A few days ago it seems Bigtreetech updated Chaoticlab's CNC TAP V2 build guide in github:
In that manual they stated that TAP must be connected to BLTouch port utilizing the signal pin:
Is this only for CNC Tap V2? As in BTT's own repo their own docs still says TAP must be connected to the 4 PIN port beside the X limit switch and the manual does not differentiate the V1 and V2 TAP:
This is a bit confusing for me. Please clearly state which one is the correct or if this is only for Tap V2.
A few days ago it seems Bigtreetech updated Chaoticlab's CNC TAP V2 build guide in github:![image](https://github.com/bigtreetech/EBB/assets/37906467/3f4edf53-62f0-45d2-bb95-bebdd5bf4a3c)
In that manual they stated that TAP must be connected to BLTouch port utilizing the signal pin:![image](https://github.com/bigtreetech/EBB/assets/37906467/89740685-eff3-4951-9fbf-a2fc5c5cf878)
Is this only for CNC Tap V2? As in BTT's own repo their own docs still says TAP must be connected to the 4 PIN port beside the X limit switch and the manual does not differentiate the V1 and V2 TAP:![image](https://github.com/bigtreetech/EBB/assets/37906467/35cb25c5-2d28-4e10-a0c7-e34104093fee)
This is a bit confusing for me. Please clearly state which one is the correct or if this is only for Tap V2.
Thank you in advance!