EBB SB2240_2209 CAN Module mount STEP/STL is missing

bigtreetech / EBB

435 stars 100 forks source link

EBB SB2240_2209 CAN Module mount STEP/STL is missing #31

Open irebane opened 1 year ago

irebane commented 1 year ago

Build manual(page 8) referring to use special little mount between SB2240 and CW2 extruder. Could you please add it to the repository or add details to the manual where to download it.

Thanks.

dazkit commented 1 year ago

The sb2209/sb2240 is an inspiration from hartk Stealthburner Toolhead Board. The spacer is from hartk https://github.com/hartk1213/MISC/blob/6e4f22c85e541eafab4471c52c59f51c7ac6b2b8/PCBs/Stealthburner_Toolhead_PCB/STLs/pcb_spacer.stl

dazkit commented 1 year ago

and of course this is missing in the manual

karamfil commented 1 year ago

Still missing, took me 20 minutes to figure out...

ja2ui0 commented 10 months ago

Would you believe it's still missing more than six months later? I was completely confused as to why the SB main body would not line up with CW2. Please add this part to the repo!

travisdieckmann commented 8 months ago

Still missing from the repo...