search

bigtreetech / EBB

488 stars 103 forks source link

Extruder Heater Not Working #95

Open leeharper40 opened 9 months ago

leeharper40 commented 9 months ago

Hi, Having an issue with my EBB2209. I was half way through an 8 hour print when i got an error ...Lost comunication with mcu didnt say which one, when rebooted all is working except the extruder heater. There is no voltage going to the heater and the extruder cooling fan does not come on. I get a reading from the thermistor and can control the stealth burner leds and can query adxl. so canbus comunications seem ok. The only error i get when setting extruder temp is the usual saftey shutdown.

Thanks Lee

leeharper40 commented 9 months ago

Found out what the problem was blown component on board and only its 3rd print WIN_20240203_16_37_03_Pro WIN_20240203_16_38_30_Pro

thought it might be a cartridge problem but that checks out ok so not sure where to go from here.