Open bodydropped72 opened 3 months ago
try to reflash! use the instructions for flashing the firmware from Knomi 1, use USB and the flash_download_tool program
bootloader change 0x0. that's how I did it! https://youtu.be/3zP8yZpm3ds
I have a different problem) I can’t reflash the custom firmware, only the original one!
configured knomi2 for my k1 max. was working fine, started a print then came back to check and the screen on knomi was black. will not respond to touch, light on back of device is red so i know theres power. anyone run into this issue?