igor-rodriguez
commented
2 years ago Solved, change this in configuration_adv.h /**
- Set this option to one of the following (or the board's defaults apply):
- LCD - Use the SD drive in the external LCD controller.
- ONBOARD - Use the SD drive on the control board.
- CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
- :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
define SDCARD_CONNECTION LCD
Hello, I'm trying to install a btt mini 12864 on an SKR PRO 1.2, the display works perfect but the card reader doesn't, do I need to modify something in the marlin? Only the SKR PRO reader works! All procedures in the manual were performed and the option #define sdsuport in config.h is enabled.