Wanted to say thank you for this Board. It is everything I expected, (although a touch difficult to figure out.)
The USB port does have power, and the fan has an ON/OFF toggle switch in the cable. My goal is to control the fan speed per the PID temp from a thermistor inside the enclosure tent.
I have a Manta E3EZ, using a CB1 module, with Klipper as an OS.
I understand the temperature thermistor and how to program it. My hurdle is the PIN assignments in the USB that are capable of stepping power up/down to the Fan being plugged into a USB port on the Manta E3EZ board.
I'd be most thankful if you can point me in the correct direction.
Wanted to say thank you for this Board. It is everything I expected, (although a touch difficult to figure out.)
The USB port does have power, and the fan has an ON/OFF toggle switch in the cable. My goal is to control the fan speed per the PID temp from a thermistor inside the enclosure tent.
I have a Manta E3EZ, using a CB1 module, with Klipper as an OS.
I understand the temperature thermistor and how to program it. My hurdle is the PIN assignments in the USB that are capable of stepping power up/down to the Fan being plugged into a USB port on the Manta E3EZ board.
I'd be most thankful if you can point me in the correct direction.