search

bigtreetech / Manta-M4P

46 stars 13 forks source link

Manta-M4P with CB1 and BTT SoC-Fan #15

Open DiTheRX opened 1 year ago

DiTheRX commented 1 year ago

When setting up the SoC-Fan, no voltage is applied to the port

[temperature_fan охлаждение_процессора_и_двигателей] pin: PC15 shutdown_speed: 0.0 kick_start_time: 0.5 off_below: 0.19 min_temp: 0 max_temp: 88.0 target_temp: 1.0 max_speed: 0.85 min_speed: 0.0 control: pid pid_Kp: 2.0 pid_Ki: 5.0 pid_Kd: 0.5 pid_deriv_time: 2.0 sensor_type: temperature_host min_speed: 0.1 max_speed: 0.6

ilai82 commented 1 year ago

How to properly connect the fan to this connectors?

Freddyb888 commented 1 year ago

Would like to know this too

Pneumanifest commented 1 year ago

You have it defined as the PC15 which is the E0-DET That fan is connected to the cb1 GPIO. I'm not sure is you need to set up the cb1 as a host MCU or not but the pin is defined as such.

pin: host: gpio79