Manta-M4P with CB1 and BTT HDMI5

bigtreetech / Manta-M4P

46 stars 13 forks source link

Manta-M4P with CB1 and BTT HDMI5 #3

Open Kudach opened 2 years ago

Kudach commented 2 years ago

I have a problem with the activation of the BTT HDMI5 in the Manta-M4P and the CB1.

How do I activate the HDMI port so that I can use the manta board completely?

billru05 commented 1 year ago

Once you load the OS on the CB1 the HDMI should work, that's providing you did not install the dt-blob-disp1-cam1.bin, if you did not load the dt-blob-disp1-cam1.bin and your HDMI is not working you may need to look at your config.sys file in the boot dir

Tbone5114 commented 1 year ago

Did you find a solution?

billru05 commented 1 year ago

Did you find a solution? Solution to what or is this reply for (Kudach)

Tbone5114 commented 1 year ago

This was for @Kudach. I'm running into the same issue where my HDMI isn't working.

Mig1880 commented 11 months ago

I found I had to power the hdmi5 via a USB C with hdmi connected. My issue is now I'm only getting 2/3rd of a screen FB_IMG_1696621610797

javcab2003 commented 6 months ago

I have a problem with the activation of the BTT HDMI5 in the Manta-M4P and the CB1.

How do I activate the HDMI port so that I can use the manta board completely?

Hi, did you find the solution?

I have the same issue, I have the CBI and the EZE3 but I cannot see anything in the display, in the web interface I can see the USB recognised for the HDMI connection but the display "HDMI 5" shows nothing. I tried to reinstall the Klipper screen and checked the log files but there is nothing that is in error status or similar