search

bigtreetech / Manta-M4P

46 stars 13 forks source link

40 Pin Header - CB1 GPIO Not Working PG7, PG8, PG9, PH10 #7

Open x2ocoder opened 1 year ago

x2ocoder commented 1 year ago

The following pins do not have any output response with CB1

PG7, PG8, PG9, PH10

x2ocoder commented 1 year ago

PG7/8/9 is documented as going to the BT Module in this PDF PH10 is documented as Reserved GPIO in this PDF yet is exposed on the 40 Pin Header https://github.com/bigtreetech/CB1/blob/master/Hardware/BIGTREETECH_CB1_V22_220812_SCH.pdf

Does PG7/8/9, PH10 also go to the 40 Pin Header as documented in Page 9 of this PDF? https://github.com/bigtreetech/Manta-M4P/blob/master/BIGTREETECH_MANTA_M4P_User_Manual.pdf

looxonline commented 1 year ago

Have taken this down as something to correct. Will get onto it with the team a little later today. Thanks for pointing it out.