search

bigtreetech / MicroProbe

83 stars 12 forks source link

Manual and step file dimension deviation #2

Open ldehaas1612 opened 1 year ago

ldehaas1612 commented 1 year ago

The dimensions specified in the manual file and the dimensions of the provided step file are not comparable. Please specify which document to follow for designing a mount.

Also, please provide extra instruction on placement of probe relative to nozzle (minimum/maximum Z height from nozzle, minimum distance away from heatsource, etc.)

Thanks

BADcustomcreations commented 1 year ago

The dimensions specified in the manual file and the dimensions of the provided step file are not comparable. Please specify which document to follow for designing a mount.

Also, please provide extra instruction on placement of probe relative to nozzle (minimum/maximum Z height from nozzle, minimum distance away from heatsource, etc.)

Thanks

Manual states the probe should be 1.5 to 2mm below nozzle when pin is fully extended, and the extends 4mm SO the probe pin when retracted should be 2mm about nozzle