search

bigtreetech / PandaTouch

149 stars 29 forks source link

This page isn’t working 192.168.8.103 didn’t send any data. ERR_EMPTY_RESPONSE #105

Closed Jgelwix closed 2 months ago

Jgelwix commented 3 months ago

Hello - I continue to experience this issue when attempting to update firmware. I have used various 2.4GHz connections and ensured the IP used in the browser matches the Network Screen/IP Address shown on the device, but all to no avail. The device is connected to WiFi and I can ping the device without issue. I am pinging the device from the same computer where the message below was received. Any guidance would be appreciated.

This page isn’t working 192.168.8.103 didn’t send any data. ERR_EMPTY_RESPONSE

MBP ~ % ping 192.168.8.103 PING 192.168.8.103 (192.168.8.103): 56 data bytes 64 bytes from 192.168.8.103: icmp_seq=0 ttl=255 time=48.044 ms 64 bytes from 192.168.8.103: icmp_seq=1 ttl=255 time=66.771 ms 64 bytes from 192.168.8.103: icmp_seq=2 ttl=255 time=87.999 ms 64 bytes from 192.168.8.103: icmp_seq=3 ttl=255 time=107.387 ms 64 bytes from 192.168.8.103: icmp_seq=4 ttl=255 time=4.622 ms 64 bytes from 192.168.8.103: icmp_seq=5 ttl=255 time=5.331 ms

Thanks in advance.

image
bigtreetech commented 3 months ago

Are you sure that your PC and/or network(s) don't have a firewall blocking port 80 on local connections? It may be better to connect the Panda Touch directly to your phone using your personal hotspot and then to push the firmware file to it directly from the phone.

Jgelwix commented 3 months ago

Good call - That did the trick. Thank you!