search

bigtreetech / PandaTouch

149 stars 29 forks source link

No back option in certain menus. #154

Closed mytechguyri closed 2 weeks ago

mytechguyri commented 4 weeks ago

Please add a "back" option on certain multi-depth menus. For example, when one goes into the "temperature / axis" menu, (layer 1) and then drills down to the fan speed control menu (layer 2). There's no way to back out of that 2nd layer menu and return to layer 1 to adjust the axis settings other than power cycling the screen. There should be a "back" button/icon on the 2nd layer menu to allow the user to back out to the 1st layer menu. IMG20241028165536 IMG20241028165506

dilixi commented 3 weeks ago

Please add a "back" option on certain multi-depth menus. For example, when one goes into the "temperature / axis" menu, (layer 1) and then drills down to the fan speed control menu (layer 2). There's no way to back out of that 2nd layer menu and return to layer 1 to adjust the axis settings other than power cycling the screen. There should be a "back" button/icon on the 2nd layer menu to allow the user to back out to the 1st layer menu.

Hi, you can press the left panel to back to the parent page.

415EA06B-3AC5-4c9b-A0EC-C3E4990951DB

mytechguyri commented 3 weeks ago

but that doesn't bring you back to the parent page, pressing the left panel only brings you back to the 2nd level menu you were already in.

mytechguyri commented 3 weeks ago

I did discover pressing the N/A C button brings you back to the previous level menu for some reason... not very intuitive.

dilixi commented 3 weeks ago

I did discover pressing the N/A C button brings you back to the previous level menu for some reason... not very intuitive.

@mytechguyri

Hi: 1 press the left button,jump to the speed control panel 2 press the left button again, return to parent panel

https://github.com/user-attachments/assets/91e8d5d8-314c-4a89-8d5c-4e5e4b20f8f1

mytechguyri commented 3 weeks ago

Ok... Not very intuitive, and could be improved, but that works

slothy89 commented 2 weeks ago

You literally tap on the Fan control section again, and it goes back to the layer below. can't get more intuitive than that. In fact the same is true for all controls in that list. Tap the nozzle temp to enter a temp, tap again to go back. Tap the printer speed button to change printer speed, tap again to go back.

https://github.com/user-attachments/assets/4d67cd30-1934-431a-b3cd-d7f6e9cfb338

bigtreetech commented 2 weeks ago

Closing for now as the UI is fairly intuitive as it currently stands. Adding extra buttons too the UI to go back would clutter it and likely be more confusing. The colour of the menu option is highlighted when the UI elements for that menu option are displayed. Tapping it again removes the highlight and goes back to the default.