search

bigtreetech / PandaTouch

96 stars 6 forks source link

Request - Support for folders and .gcode files #21

Closed AndiS977 closed 4 months ago

AndiS977 commented 4 months ago

Please add support for (sub)folders and .gcode files on the printers SDcard.

CyberHugger commented 4 months ago

Please!

looxonline commented 4 months ago

gcode files are not supported by the BBL machines. It must be in 3mf format. Folders is already under consideration and mentioned in another issue report. Closing as a duplicate.

AndiS977 commented 4 months ago

gcode files are supported. I can export as gcode files and then transfer them via ftp to the machines SD card (P1P). Then I can select them on the stock display to print. It has the advantage to start the print faster, because the embedded gcode has not to be extracted out of the 3mf.

looxonline commented 4 months ago

gcode files are supported. I can export as gcode files and then transfer them via ftp to the machines SD card (P1P). Then I can select them on the stock display to print. It has the advantage to start the print faster, because the embedded gcode has not to be extracted out of the 3mf.

They are not supported when initiating a print over MQTT.

AndiS977 commented 4 months ago

Ah, ok. Thank you for your answer.