[Initial initialization] Cannot connect to network

After powering up the Panda Touch the first time, trying to connect to network does not work. Always sates

"Failed to connect to current WiFi, Please check signal strength & password entered and then reconnect."

Standing right next to the router. Full signal strength indicator. Not too crowded. 2.4GHz network. No special characters in SSID nor password. Power cycling does not help.

It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units.

I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that.

Gesendet von Outlook für iOShttps://aka.ms/o0ukef

Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31)

It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units.

— Reply to this email directly, view it on GitHubhttps://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950253677, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4. You are receiving this because you authored the thread.Message ID: @.***>

Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers.

On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.***> wrote:

I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that.

Gesendet von Outlook für iOShttps://aka.ms/o0ukef

Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31)

It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units.

— Reply to this email directly, view it on GitHub< https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950253677>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4>.

You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950254223, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM . You are receiving this because you commented.Message ID: @.***>

Mine wouldnt connect yesterday after turning the printer and bambu touch on after both being powered off.. it just took a few power cycles of the bambu touch and and it finally connected. It's the 1st time it happened to me. I just assumed the printer wasn't quite setup on the network and ready yet.. it has been fine since.m

On Sat, Feb 17, 2024, 12:27 PM Bill Carriveau @.***> wrote:

Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers.

On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.***> wrote:

I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that.

Gesendet von Outlook für iOShttps://aka.ms/o0ukef

Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31)

It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units.

— Reply to this email directly, view it on GitHub<

https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950253677>,

or unsubscribe<

https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4>.

You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950254223>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM>

. You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950262812, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF5SL7JQ4YE3ZE4SYMMO6FTYUDSADAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI3DEOBRGI . You are receiving this because you are subscribed to this thread.Message ID: @.***>

Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers. … On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.> wrote: I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that. Gesendet von Outlook für iOShttps://aka.ms/o0ukef ____ Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31) It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units. — Reply to this email directly, view it on GitHub< #31 (comment)>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4>. You are receiving this because you authored the thread.Message ID: @.> — Reply to this email directly, view it on GitHub <#31 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM . You are receiving this because you commented.Message ID: @.***>

Haven't found time to look further into it, because I bought a cheap access point so its working for now. Will update once I find some time

Jinxed myself. Turn everything on an off again and now the bambu touch won't connect to my p1s.. it connects to my a1 just fine still though.. so I'd say this person isn't the only one seeing this.

On Sat, Feb 17, 2024, 1:17 PM TheOrdner @.***> wrote:

Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers. … <#m9040675660772423438> On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.> wrote: I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that. Gesendet von Outlook für iOShttps://aka.ms/o0ukef https://aka.ms/o0ukef ____ Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31 https://github.com/bigtreetech/PandaTouch/issues/31) It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units. — Reply to this email directly, view it on GitHub< #31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950253677>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4> https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4%3E. You are receiving this because you authored the thread.Message ID: @.> — Reply to this email directly, view it on GitHub <#31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950254223>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM . You are receiving this because you commented.Message ID: @.***>

Haven't found time to look further into it, because I bought a cheap access point so its working for now. Will update once I find some time

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950274567, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF5SL7PJZOGRABD3OHKTUC3YUDXZZAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI3TINJWG4 . You are receiving this because you commented.Message ID: @.***>

And it's working again.. the ip address the p1s was getting changed on power cycle.. I edited the ip on the bambu touch and back in business.

On Sat, Feb 17, 2024, 1:17 PM TheOrdner @.***> wrote:

Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers. … <#m9040675660772423438> On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.> wrote: I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that. Gesendet von Outlook für iOShttps://aka.ms/o0ukef https://aka.ms/o0ukef ____ Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31 https://github.com/bigtreetech/PandaTouch/issues/31) It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units. — Reply to this email directly, view it on GitHub< #31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950253677>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4> https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4%3E. You are receiving this because you authored the thread.Message ID: @.> — Reply to this email directly, view it on GitHub <#31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950254223>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM . You are receiving this because you commented.Message ID: @.***>

Haven't found time to look further into it, because I bought a cheap access point so its working for now. Will update once I find some time

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950274567, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF5SL7PJZOGRABD3OHKTUC3YUDXZZAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI3TINJWG4 . You are receiving this because you commented.Message ID: @.***>

Jinxed myself. Turn everything on an off again and now the bambu touch won't connect to my p1s.. it connects to my a1 just fine still though.. so I'd say this person isn't the only one seeing this. … On Sat, Feb 17, 2024, 1:17 PM TheOrdner @.> wrote: Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers. … <#m9040675660772423438> On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.> wrote: I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that. Gesendet von Outlook für iOShttps://aka.ms/o0ukef https://aka.ms/o0ukef ____ Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31 <#31>) It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units. — Reply to this email directly, view it on GitHub< #31 (comment) <#31 (comment)>>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4> https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4%3E. You are receiving this because you authored the thread.Message ID: @.> — Reply to this email directly, view it on GitHub <#31 (comment) <#31 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM . You are receiving this because you commented.Message ID: @.> Haven't found time to look further into it, because I bought a

The OP in thisnissues

Jinxed myself. Turn everything on an off again and now the bambu touch won't connect to my p1s.. it connects to my a1 just fine still though.. so I'd say this person isn't the only one seeing this. … On Sat, Feb 17, 2024, 1:17 PM TheOrdner @.> wrote: Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers. … <#m9040675660772423438> On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.> wrote: I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that. Gesendet von Outlook für iOShttps://aka.ms/o0ukef https://aka.ms/o0ukef ____ Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31 <#31>) It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units. — Reply to this email directly, view it on GitHub< #31 (comment) <#31 (comment)>>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4> https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4%3E. You are receiving this because you authored the thread.Message ID: @.> — Reply to this email directly, view it on GitHub <#31 (comment) <#31 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM . You are receiving this because you commented.Message ID: @.> Haven't found time to look further into it, because I bought a cheap access point so its working for now. Will update once I find some time — Reply to this email directly, view it on GitHub <#31 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF5SL7PJZOGRABD3OHKTUC3YUDXZZAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI3TINJWG4 . You are receiving this because you commented.Message ID: @.***>

The OP couldn't connect to his Wi-Fi network but left no details about it.

Your self-inflicted wound is allowing your printer to run on DHCP leases, causing you issues, not a PandTouch issue. Either reserve the IP in your router or manually assign it one outside the DHCP pool.

Already assigned an ip in a router since it happened but thanks for the lecture there sizzle chest..

On Sat, Feb 17, 2024, 3:11 PM Bill Carriveau @.***> wrote:

Jinxed myself. Turn everything on an off again and now the bambu touch won't connect to my p1s.. it connects to my a1 just fine still though.. so I'd say this person isn't the only one seeing this. … <#m-3885479166232180581> On Sat, Feb 17, 2024, 1:17 PM TheOrdner @.> wrote: Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers. … <#m9040675660772423438> On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.> wrote: I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that. Gesendet von Outlook für iOShttps://aka.ms/o0ukef http://aka.ms/o0ukef https://aka.ms/o0ukef https://aka.ms/o0ukef ____ Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31 https://github.com/bigtreetech/PandaTouch/issues/31 <#31 https://github.com/bigtreetech/PandaTouch/issues/31>) It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units. — Reply to this email directly, view it on GitHub< #31 https://github.com/bigtreetech/PandaTouch/issues/31 (comment) <#31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950253677>>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4> https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4%3E. You are receiving this because you authored the thread.Message ID: @.*> — Reply to this email directly, view it on GitHub <#31 https://github.com/bigtreetech/PandaTouch/issues/31 (comment) <#31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950254223>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM . You are receiving this because you commented.Message ID: @.***> Haven't found time to look further into it, because I bought a

The OP in thisnissues

Jinxed myself. Turn everything on an off again and now the bambu touch won't connect to my p1s.. it connects to my a1 just fine still though.. so I'd say this person isn't the only one seeing this. … <#m-3885479166232180581> On Sat, Feb 17, 2024, 1:17 PM TheOrdner @.> wrote: Can you set up a less secure guest network and try to connect? Maybe just WEP or WPA2? Then provide specific details for them to troubleshoot with. You didn't provide anything helpful for the developers. … <#m9040675660772423438> On Sat, Feb 17, 2024, 10:49 AM TheOrdner @.> wrote: I certainly can assure you that it has nothing to do with my SSID nor password. Only letters and numbers are being used and no whitepsaces. There are others on Reddit too. It seems to have something to do with WPA3 but thanks for looking into that. Gesendet von Outlook für iOShttps://aka.ms/o0ukef http://aka.ms/o0ukef https://aka.ms/o0ukef https://aka.ms/o0ukef ____ Von: Bill Carriveau @.> Gesendet: Saturday, February 17, 2024 5:47:18 PM An: bigtreetech/PandaTouch @.> Cc: TheOrdner @.>; Author @.> Betreff: Re: [bigtreetech/PandaTouch] [Initial initialization] Cannot connect to network (Issue #31 https://github.com/bigtreetech/PandaTouch/issues/31 <#31 https://github.com/bigtreetech/PandaTouch/issues/31>) It's something unique to your SSID or password, most likely. You appear to be the only one with an issue out of thousands of units. — Reply to this email directly, view it on GitHub< #31 https://github.com/bigtreetech/PandaTouch/issues/31 (comment) <#31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950253677>>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4> https://github.com/notifications/unsubscribe-auth/AHPVX7OEYSA6SBLRCIKKBMDYUDNJNAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TGNRXG4%3E. You are receiving this because you authored the thread.Message ID: @.*> — Reply to this email directly, view it on GitHub <#31 https://github.com/bigtreetech/PandaTouch/issues/31 (comment) <#31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950254223>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM https://github.com/notifications/unsubscribe-auth/AOP4AJ6A5HZ3OF7VFFZRVD3YUDNTLAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI2TIMRSGM . You are receiving this because you commented.Message ID: @.> Haven't found time to look further into it, because I bought a cheap access point so its working for now. Will update once I find some time — Reply to this email directly, view it on GitHub <#31 (comment) https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950274567>, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF5SL7PJZOGRABD3OHKTUC3YUDXZZAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI3TINJWG4 https://github.com/notifications/unsubscribe-auth/BF5SL7PJZOGRABD3OHKTUC3YUDXZZAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI3TINJWG4 . You are receiving this because you commented.Message ID: @.>

The OP couldn't connect to his Wi-Fi network but left no details about it.

Your self-inflicted wound is allowing your printer to run on DHCP leases, causing you issues, not a PandTouch issue. Either reserve the IP in your router or manually assign it one outside the DHCP pool.

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/PandaTouch/issues/31#issuecomment-1950297860, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF5SL7OPWIE7MAJKW6C3YK3YUEFGHAVCNFSM6AAAAABDGSD3Q6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQGI4TOOBWGA . You are receiving this because you commented.Message ID: @.***>

Im no expert when it comes to networks so I dont really know what details are relevant and Iam happyto share everything that is important to this matter.

@TheOrdner Were you able to get it to connect at all? There is something unique about your network that we would love to figure out.

I also cannot get mine to connect to wifi. Same issue as OP. Have not even been able to complete setup.

My access points are Netgear. I have a WAX214PA, and a WAX218.

I also cannot get mine to connect to wifi. Same issue as OP. Have not even been able to complete setup.

My access points are Netgear. I have a WAX214PA, and a WAX218.

ok, I did actually just get it to connect finally after power-cycling the panda touch. Maybe it's a weird first-boot issue? I tried over and over again before power-cycling it and no-go, but it actually connected on it's own when I turned it off-on.

I just bought a Panda Touch and i have two differnt 2.4 Ghz networks and i use to work setting networks up. There is a big issue with the wifi on the touch.

I have a xtouch screen set up and no issues with that.

I bought the Touch for having the extra functions.

Im now setting up a specific 3D network on 2.4 for the touch. I will post updates ..

Im using a Asus router for just distributing the IP and a Ubiquiti AP lite for wifi on the upper and lower floor. Have not had any issues with both my computers and my Homey Pro or any other units that is bound to 2.4

same new device, cant connect to wifi, using unifi ac lr

bigtreetech / PandaTouch

[Initial initialization] Cannot connect to network #31