SKR 2 w/ TMC2209 - TMC CONNECTION ERROR on 3 out of 5 Drivers

cjmalchow commented 2 years ago

Hi,

I've run into a bit of a problem where my SKR 2 board is set for VCC power and is throwing low errors for me Y, Z, Z2(which isn't connected). X and E report back okay. I will post the full M122 below this message. Any help would be greatly appreciated! If you want to see the configuration.h, adv.h or any other of the files for compiling just let me know.

Thanks for anyone that helps!

Send: M122 Recv: X Y Z Z2 E Recv: Address 0 2 1 3 0 Recv: Enabled false false false false false Recv: Set current 1300 580 580 580 700 Recv: RMS current 1270 994 994 994 673 Recv: MAX current 1791 1402 1402 1402 949 Recv: Run current 22/31 17/31 17/31 17/31 21/31 Recv: Hold current 11/31 8/31 8/31 8/31 10/31 Recv: CS actual 11/31 0/31 0/31 0/31 10/31 Recv: PWM scale Recv: vsense 0=.325 0=.325 0=.325 0=.325 1=.18 Recv: stealthChop true false false false false Recv: msteps 64 256 256 256 64 Recv: interp true false false false true Recv: tstep max 0 0 0 max Recv: PWM thresh. 316 1601 10621 10621 1075 Recv: [mm/s] 100 100 3 3 30 Recv: OT prewarn false false false false false Recv: triggered Recv: OTP false false false false false Recv: pwm scale sum 13 0 0 0 12 Recv: pwm scale auto 0 0 0 0 0 Recv: pwm offset auto 36 0 0 0 36 Recv: pwm grad auto 14 0 0 0 14 Recv: off time 0 0 0 0 0 Recv: blank time 24 16 16 16 24 Recv: hysteresis Recv: -end 2 -3 -3 -3 2 Recv: -start 1 1 1 1 1 Recv: Stallguard thrs 0 0 0 0 0 Recv: uStep count 2 0 0 0 2 Recv: DRVSTATUS X Y Z Z2 E Recv: sg_result 0 0 0 0 0 Recv: stst * Recv: olb Recv: ola Recv: s2gb Recv: s2ga Recv: otpw Recv: ot Recv: 157C Recv: 150C Recv: 143C Recv: 120C Recv: s2vsa Recv: s2vsb Recv: Driver registers: Recv: X 0xC0:0B:00:00 Recv: Y 0x00:00:00:00 Bad response! Recv: Z 0x00:00:00:00 Bad response! Recv: Z2 0x00:00:00:00 Bad response! Recv: E 0x80:0A:00:00 Recv: Recv: Recv: Testing X connection... OK Recv: Testing Y connection... Error: All LOW Recv: Testing Z connection... Error: All LOW Recv: Testing Z2 connection... Error: All LOW Recv: Testing E connection... OK Recv: ok

radek8 commented 2 years ago

Send the configuration. Send a photo of the pin configuration under the engine controllers. Send a photo of the underside of the engine controller

radek8 commented 2 years ago

If you swap X and Y, will X still work and Y will not work?

fab74560 commented 2 years ago

salut débranche la chauffe de la tète j'ai le même problème

J-charles-C commented 2 years ago

salut débranche la chauffe de la tète j'ai le même problème

Fab74560, peux tu préciser, Je galère sur ce problème depuis trois jours. Des drivers qui marchent très bien sur une autre machine me donne un TMC Error. Le sensorless homing ne fonctionne pas, le moteur part dans la mauvaise direction alors qu'avec un G1 cela fonctionne. J'en perd mon latin.

fab74560 commented 2 years ago

Bonjour j-charles

Quand tu débranche le HE0 ca marche ces le HE0 qui a pt pour moi

Si je le débranche tous marche bien mais la cartouche de chauffe

Je te joint mon fichier de retour M122

De : J-charles-C @.> Envoyé : lundi 3 janvier 2022 20:08 À : bigtreetech/SKR-2 @.> Cc : fab74560 @.>; Comment @.> Objet : Re: [bigtreetech/SKR-2] SKR 2 w/ TMC2209 - TMC CONNECTION ERROR on 3 out of 5 Drivers (Issue #93)

salut débranche la chauffe de la tète j'ai le même problème

Fab74560, peux tu préciser, Je galère sur ce problème depuis trois jours. Des drivers qui marchent très bien sur une autre machine me donne un TMC Error. Le sensorless homing ne fonctionne pas, le moteur part dans la mauvaise direction alors qu'avec un G1 cela fonctionne. J'en perd mon latin.

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/SKR-2/issues/93#issuecomment-1004295611 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ALHB2T4DVOOQ4RVCK7CJP3LUUHXYDANCNFSM5KH2YKAQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub . You are receiving this because you commented. https://github.com/notifications/beacon/ALHB2T5SOOWCA2WII462EWLUUHXYDA5CNFSM5KH2YKA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOHPOFLOY.gif Message ID: @. @.> >

19:53:07.652 : No start signal detected - forcing start 19:53:07.661 : N1 M11034 19:53:07.661 : N2 M11536 19:53:07.661 : N3 M10536 19:53:07.661 : N4 M11435 19:53:07.661 : N5 M111 S698 19:53:07.661 : N6 T060 19:53:07.661 : N7 M2022 19:53:07.663 : N8 M8019 19:53:07.664 : FIRMWARE_NAME:Marlin bugfix-2.0.7.2.x (Jun 10 2021 14:06:38) SOURCE_CODE_URL:github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:SKR-2 EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff 19:53:07.664 : N9 M220 S100104 19:53:07.664 : N10 M221 S10081 19:53:07.664 : Cap:SERIAL_XON_XOFF:0 19:53:07.664 : Cap:BINARY_FILE_TRANSFER:0 19:53:07.664 : Cap:EEPROM:1 19:53:07.664 : Cap:VOLUMETRIC:1 19:53:07.664 : Cap:AUTOREPORT_TEMP:1 19:53:07.665 : Cap:PROGRESS:0 19:53:07.665 : Cap:PRINT_JOB:1 19:53:07.665 : Cap:AUTOLEVEL:1 19:53:07.665 : Cap:RUNOUT:0 19:53:07.665 : Cap:Z_PROBE:1 19:53:07.665 : Cap:LEVELING_DATA:1 19:53:07.665 : Cap:BUILD_PERCENT:0 19:53:07.665 : Cap:SOFTWARE_POWER:0 19:53:07.665 : Cap:TOGGLE_LIGHTS:0 19:53:07.665 : Cap:CASE_LIGHT_BRIGHTNESS:0 19:53:07.665 : Cap:EMERGENCY_PARSER:1 19:53:07.665 : Cap:PROMPT_SUPPORT:1 19:53:07.665 : Cap:SDCARD:1 19:53:07.665 : Cap:REPEAT:0 19:53:07.665 : Cap:SD_WRITE:1 19:53:07.665 : Cap:AUTOREPORT_SD_STATUS:1 19:53:07.665 : Cap:LONG_FILENAME:1 19:53:07.665 : Cap:THERMAL_PROTECTION:1 19:53:07.665 : Cap:MOTION_MODES:0 19:53:07.665 : Cap:ARCS:1 19:53:07.665 : Cap:BABYSTEPPING:1 19:53:07.665 : Cap:CHAMBER_TEMPERATURE:0 19:53:07.666 : Cap:COOLER_TEMPERATURE:0 19:53:07.666 : Cap:MEATPACK:0 19:53:07.666 : area:{full:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:235.0000,y:235.0000,z:270.0000}},work:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:235.0000,y:235.0000,z:270.0000}}} 19:53:07.666 : N11 M111 S687 19:53:07.672 : X:0.0000 Y:0.0000 Z:0.0000 E:0.0000 Count X:0 Y:0 Z:0 19:53:07.672 : echo:DEBUG:INFO,ERRORS 19:53:07.672 : Begin file list 19:53:07.672 : N12 T09 19:53:07.672 : N13 M155 S182 19:53:07.679 : End file list 19:53:07.679 : echo:Unknown command: "M80" 19:53:07.679 : echo:DEBUG:INFO,ERRORS 19:53:16.684 : N14 M12223 19:53:16.684 : X Y Z E 19:53:16.684 : Address 0 0 0 0 19:53:16.716 : Enabled false false false false 19:53:16.716 : Set current 800 800 800 800 19:53:16.748 : RMS current 795 795 795 795 19:53:16.780 : MAX current 1121 1121 1121 1121 19:53:16.780 : Run current 25/31 25/31 25/31 25/31 19:53:16.780 : Hold current 12/31 12/31 12/31 12/31 19:53:16.813 : CS actual 12/31 12/31 12/31 12/31 19:53:16.813 : PWM scale 19:53:16.845 : vsense 1=.18 1=.18 1=.18 1=.18 19:53:16.877 : stealthChop true true true true 19:53:16.909 : msteps 16 16 16 16 19:53:16.941 : interp true true true true 19:53:16.973 : tstep max max max max 19:53:16.973 : PWM thresh. 82 82 98 274 19:53:17.005 : [mm/s] 120 120 20 30 19:53:17.037 : OT prewarn false false false false 19:53:17.069 : pwm scale sum 14 14 14 14 19:53:17.101 : pwm scale auto 0 0 0 0 19:53:17.133 : pwm offset auto 36 36 36 36 19:53:17.165 : pwm grad auto 14 14 14 14 19:53:17.197 : off time 4 4 4 4 19:53:17.229 : blank time 24 24 24 24 19:53:17.229 : hysteresis 19:53:17.261 : -end 2 2 2 2 19:53:17.293 : -start 1 1 1 1 19:53:17.293 : Stallguard thrs 0 0 0 0 19:53:17.325 : uStep count 40 40 40 40 19:53:17.325 : DRVSTATUS X Y Z E 19:53:17.357 : sg_result 0 0 0 0 19:53:17.389 : stst 19:53:17.421 : olb 19:53:17.453 : ola 19:53:17.485 : s2gb 19:53:17.517 : s2ga 19:53:17.549 : otpw 19:53:17.581 : ot 19:53:17.613 : 157C 19:53:17.645 : 150C 19:53:17.677 : 143C 19:53:17.709 : 120C 19:53:17.741 : s2vsa 19:53:17.773 : s2vsb 19:53:17.773 : Driver registers: 19:53:17.781 : X 0xC0:0C:00:00 19:53:17.790 : Y 0xC0:0C:00:00 19:53:17.797 : Z 0xC0:0C:00:00 19:53:17.805 : E 0xC0:0C:00:00 19:53:17.813 : Testing X connection... OK 19:53:17.821 : Testing Y connection... OK 19:53:17.829 : Testing Z connection... OK 19:53:17.837 : Testing E connection... OK

J-charles-C commented 2 years ago

Salut,

cette carte est une misère sans nom.

Merci pour le tuyau, je vais tester.

cordialement

Le 4 janv. 2022 à 15:40, fab74560 @.***> a écrit :

Bonjour j-charles

Quand tu débranche le HE0 ca marche ces le HE0 qui a pt pour moi

Si je le débranche tous marche bien mais la cartouche de chauffe

Je te joint mon fichier de retour M122

De : J-charles-C @.> Envoyé : lundi 3 janvier 2022 20:08 À : bigtreetech/SKR-2 @.> Cc : fab74560 @.>; Comment @.> Objet : Re: [bigtreetech/SKR-2] SKR 2 w/ TMC2209 - TMC CONNECTION ERROR on 3 out of 5 Drivers (Issue #93)

salut débranche la chauffe de la tète j'ai le même problème

Fab74560, peux tu préciser, Je galère sur ce problème depuis trois jours. Des drivers qui marchent très bien sur une autre machine me donne un TMC Error. Le sensorless homing ne fonctionne pas, le moteur part dans la mauvaise direction alors qu'avec un G1 cela fonctionne. J'en perd mon latin.

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/SKR-2/issues/93#issuecomment-1004295611 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ALHB2T4DVOOQ4RVCK7CJP3LUUHXYDANCNFSM5KH2YKAQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub . You are receiving this because you commented. https://github.com/notifications/beacon/ALHB2T5SOOWCA2WII462EWLUUHXYDA5CNFSM5KH2YKA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOHPOFLOY.gif Message ID: @. @.> >

19:53:07.652 : No start signal detected - forcing start 19:53:07.661 : N1 M11034 19:53:07.661 : N2 M11536 19:53:07.661 : N3 M10536 19:53:07.661 : N4 M11435 19:53:07.661 : N5 M111 S698 19:53:07.661 : N6 T060 19:53:07.661 : N7 M2022 19:53:07.663 : N8 M8019 19:53:07.664 : FIRMWARE_NAME:Marlin bugfix-2.0.7.2.x (Jun 10 2021 14:06:38) SOURCE_CODE_URL:github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:SKR-2 EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff 19:53:07.664 : N9 M220 S100104 19:53:07.664 : N10 M221 S10081 19:53:07.664 : Cap:SERIAL_XON_XOFF:0 19:53:07.664 : Cap:BINARY_FILE_TRANSFER:0 19:53:07.664 : Cap:EEPROM:1 19:53:07.664 : Cap:VOLUMETRIC:1 19:53:07.664 : Cap:AUTOREPORT_TEMP:1 19:53:07.665 : Cap:PROGRESS:0 19:53:07.665 : Cap:PRINT_JOB:1 19:53:07.665 : Cap:AUTOLEVEL:1 19:53:07.665 : Cap:RUNOUT:0 19:53:07.665 : Cap:Z_PROBE:1 19:53:07.665 : Cap:LEVELING_DATA:1 19:53:07.665 : Cap:BUILD_PERCENT:0 19:53:07.665 : Cap:SOFTWARE_POWER:0 19:53:07.665 : Cap:TOGGLE_LIGHTS:0 19:53:07.665 : Cap:CASE_LIGHT_BRIGHTNESS:0 19:53:07.665 : Cap:EMERGENCY_PARSER:1 19:53:07.665 : Cap:PROMPT_SUPPORT:1 19:53:07.665 : Cap:SDCARD:1 19:53:07.665 : Cap:REPEAT:0 19:53:07.665 : Cap:SD_WRITE:1 19:53:07.665 : Cap:AUTOREPORT_SD_STATUS:1 19:53:07.665 : Cap:LONG_FILENAME:1 19:53:07.665 : Cap:THERMAL_PROTECTION:1 19:53:07.665 : Cap:MOTION_MODES:0 19:53:07.665 : Cap:ARCS:1 19:53:07.665 : Cap:BABYSTEPPING:1 19:53:07.665 : Cap:CHAMBER_TEMPERATURE:0 19:53:07.666 : Cap:COOLER_TEMPERATURE:0 19:53:07.666 : Cap:MEATPACK:0 19:53:07.666 : area:{full:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:235.0000,y:235.0000,z:270.0000}},work:{min:{x:0.0000,y:0.0000,z:0.0000},max:{x:235.0000,y:235.0000,z:270.0000}}} 19:53:07.666 : N11 M111 S687 19:53:07.672 : X:0.0000 Y:0.0000 Z:0.0000 E:0.0000 Count X:0 Y:0 Z:0 19:53:07.672 : echo:DEBUG:INFO,ERRORS 19:53:07.672 : Begin file list 19:53:07.672 : N12 T09 19:53:07.672 : N13 M155 S182 19:53:07.679 : End file list 19:53:07.679 : echo:Unknown command: "M80" 19:53:07.679 : echo:DEBUG:INFO,ERRORS 19:53:16.684 : N14 M12223 19:53:16.684 : X Y Z E 19:53:16.684 : Address 0 0 0 0 19:53:16.716 : Enabled false false false false 19:53:16.716 : Set current 800 800 800 800 19:53:16.748 : RMS current 795 795 795 795 19:53:16.780 : MAX current 1121 1121 1121 1121 19:53:16.780 : Run current 25/31 25/31 25/31 25/31 19:53:16.780 : Hold current 12/31 12/31 12/31 12/31 19:53:16.813 : CS actual 12/31 12/31 12/31 12/31 19:53:16.813 : PWM scale 19:53:16.845 : vsense 1=.18 1=.18 1=.18 1=.18 19:53:16.877 : stealthChop true true true true 19:53:16.909 : msteps 16 16 16 16 19:53:16.941 : interp true true true true 19:53:16.973 : tstep max max max max 19:53:16.973 : PWM thresh. 82 82 98 274 19:53:17.005 : [mm/s] 120 120 20 30 19:53:17.037 : OT prewarn false false false false 19:53:17.069 : pwm scale sum 14 14 14 14 19:53:17.101 : pwm scale auto 0 0 0 0 19:53:17.133 : pwm offset auto 36 36 36 36 19:53:17.165 : pwm grad auto 14 14 14 14 19:53:17.197 : off time 4 4 4 4 19:53:17.229 : blank time 24 24 24 24 19:53:17.229 : hysteresis 19:53:17.261 : -end 2 2 2 2 19:53:17.293 : -start 1 1 1 1 19:53:17.293 : Stallguard thrs 0 0 0 0 19:53:17.325 : uStep count 40 40 40 40 19:53:17.325 : DRVSTATUS X Y Z E 19:53:17.357 : sg_result 0 0 0 0 19:53:17.389 : stst 19:53:17.421 : olb 19:53:17.453 : ola 19:53:17.485 : s2gb 19:53:17.517 : s2ga 19:53:17.549 : otpw 19:53:17.581 : ot 19:53:17.613 : 157C 19:53:17.645 : 150C 19:53:17.677 : 143C 19:53:17.709 : 120C 19:53:17.741 : s2vsa 19:53:17.773 : s2vsb 19:53:17.773 : Driver registers: 19:53:17.781 : X 0xC0:0C:00:00 19:53:17.790 : Y 0xC0:0C:00:00 19:53:17.797 : Z 0xC0:0C:00:00 19:53:17.805 : E 0xC0:0C:00:00 19:53:17.813 : Testing X connection... OK 19:53:17.821 : Testing Y connection... OK 19:53:17.829 : Testing Z connection... OK 19:53:17.837 : Testing E connection... OK — Reply to this email directly, view it on GitHub https://github.com/bigtreetech/SKR-2/issues/93#issuecomment-1004866599, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFOAFNJIC2NHLAKLKZOIC33UUMBFNANCNFSM5KH2YKAQ. Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you commented.

Eddiiie commented 2 years ago

Any luck?

fab74560 commented 2 years ago

j-c pardons pour le retard à tu trouver ?

J-charles-C commented 2 years ago

Bonjour,

J'ai trouvé une parade, j'ai passé deux steppers en 2208 et désactiver l'UART.

J'attends un correctif pour mettre à jour la machine.

cordialement

fab74560 commented 2 years ago

Cool moi j’ai changer la carte pour une lerge K-v2

Quand ils mon changer ma skr j’ai las moteur qui fonts un bruit quand ils sont à l’arrêt

Dit moi si sa marche avec le correctif

merci

De : J-charles-C @.> Envoyé : vendredi 18 février 2022 08:58 À : bigtreetech/SKR-2 @.> Cc : fab74560 @.>; Comment @.> Objet : Re: [bigtreetech/SKR-2] SKR 2 w/ TMC2209 - TMC CONNECTION ERROR on 3 out of 5 Drivers (Issue #93)

Bonjour,

J'ai trouvé une parade, j'ai passé deux steppers en 2208 et désactiver l'UART.

J'attends un correctif pour mettre à jour la machine.

cordialement

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/SKR-2/issues/93#issuecomment-1044094134 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ALHB2T2XZBXLRWA7ULVAUXLU3X3X3ANCNFSM5KH2YKAQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub . You are receiving this because you commented. https://github.com/notifications/beacon/ALHB2T3QYKBWHWF33HAPNVTU3X3X3A5CNFSM5KH2YKA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOHY5ZZNQ.gif Message ID: @. @.> >

bigtreetech / SKR-2

SKR 2 w/ TMC2209 - TMC CONNECTION ERROR on 3 out of 5 Drivers #93