"Slow" channel increase doesn't work when increasing to near 0

[GoogleCodeExporter]

Channel mix:
-100 FULL ID0
   0 FULL ID1  SLOW increase 5 second

The "slow" doesn't work because it instantly goes from -100 to 0 when I flip 
the switch.  If I change ID1 to "5 FULL ID1 SLOW" then it works normally.

Original issue reported on code.google.com by coderi...@gmail.com on 10 May 2013 at 11:20

[GoogleCodeExporter]

Is this your complete mix setting? Or do you have a REPLACE multiplex as well?
-100 FULL ID0
will jump between -100 and +100 when you change the ID0 switch.

Mike.

Original comment by michael....@mypostoffice.co.uk on 21 Aug 2013 at 8:38

[GoogleCodeExporter]

Yes, sorry ID1 was a "replace" mix.

Just to be clear, the following mix works:
-100   FULL ID0
   5 R FULL ID1 SLOW increase 5 second

Switching from ID0 to ID1 results in a slow increase from -100 to 5.

This mix does not work:
-100   FULL ID0
   0 R FULL ID1 SLOW increase 5 second

Switching from ID0 to ID1 instantly goes from -100 to 0.

This bug report applies to r789 or thereabout. I think newer versions do not 
work with any of the mixes above, they require use of an extra channel to make 
"slow" work. I'm still using r789 and don't plan on upgrading because of this 
so I think it's safe to just close this report and I can live with the slight 
issue in my old version.

Original comment by coderi...@gmail.com on 21 Aug 2013 at 9:41

[GoogleCodeExporter]

Original comment by michael....@mypostoffice.co.uk on 14 Dec 2013 at 3:18

• Changed state: Closed