search

billkenney / revert_qidi_software

revert klipper and moonraker to working versions from qidi’s repo, and install the latest working version of fluidd
8 stars 1 forks source link

Qidi Plus 4 the system starts abnormally #2

Closed DeeMon4eg closed 1 month ago

DeeMon4eg commented 1 month ago

You have a great article on restoring firmware for qidi max3/plus3/smart3. Can you help with a similar problem for qidi plus4? I'm bad at Linux commands.

billkenney commented 1 month ago

I think the Plus4 runs on the same OS and has updated klipper/moonraker/fluidd, but the firmware is obviously different. Best advice I could give is to reinstall the firmware.

DeeMon4eg commented 1 month ago

That's exactly what I wanted to do. But as I understood, there are different commands for all printers, according to your instructions. Which one will be for plus4? As I wrote, I'm weak in Linux.

billkenney commented 1 month ago

You don't need to use Linux. Just put the firmware files on a flash drive. https://wiki.qidi3d.com/en/PLUS4/Manual/firmware-update

DeeMon4eg commented 1 month ago

Unfortunately, this did not help. "the system starts abnormally" still appears on the screen. At the same time, it has stopped connecting via ssh.

billkenney commented 1 month ago

I don't have the plus 4, so I'm not able to help. You need to contact Qidi for support.