Submit COPASI 4.31.243

[biosimulators-daemon]

---

id: copasi version: 4.31.243 specificationsUrl: https://raw.githubusercontent.com/biosimulators/Biosimulators_COPASI/77f7b5089c0ca84a62ac4a2c35c8f625bf30c89b/biosimulators.json specificationsPatch: version: 4.31.243 image: url: ghcr.io/biosimulators/biosimulators_copasi/copasi:4.31.243 validateImage: true commitSimulator: true

---

[biosimulators-daemon]

Thank you @biosimulators-daemon for your submission to the BioSimulators simulator validation/submission system!

The BioSimulators validator bot is validating the specifications of your simulator, validating your Docker image, and committing your simulator to the BioSimulators registry.

We will discuss any concerns with your submission in this issue.

A complete log of your simulator submission job will be available for 90 days here. The results of the validation of your tool will also be saved as a JSON file. A link to this file will be available for 90 days from the "Artifacts" section at the bottom of this page.

[biosimulators-daemon]

The specifications of your simulator is valid!

[biosimulators-daemon]

Summary of tests

• Executed 69 test cases

• Passed 49 test cases:

  • cli.CliDescribesSupportedEnvironmentVariablesInline
  • cli.CliDisplaysHelpInline
  • cli.CliDisplaysVersionInformationInline
  • combine_archive.CombineArchiveHasSedDocumentsInNestedDirectories
  • combine_archive.CombineArchiveHasSedDocumentsWithSameNamesInDifferentInNestedDirectories
  • combine_archive.WhenACombineArchiveHasAMasterFileSimulatorOnlyExecutesThisFile
  • combine_archive.WhenACombineArchiveHasNoMasterFileSimulatorExecutesAllSedDocuments
  • docker_image.DeclaresSupportedEnvironmentVariables
  • docker_image.DefaultUserIsRoot
  • docker_image.HasBioContainersLabels
  • docker_image.HasOciLabels
  • docker_image.SingularityImageExecutesSimulationsSuccessfully
  • log.SimulatorReportsTheStatusOfTheExecutionOfCombineArchives
  • log.SimulatorReportsTheStatusOfTheExecutionOfSedDocuments
  • log.SimulatorReportsTheStatusOfTheExecutionOfSedOutputs
  • log.SimulatorReportsTheStatusOfTheExecutionOfSedTasks
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Tomida-EMBO-J-2003-NFAT-translocation
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Varusai-Sci-Rep-2018-mTOR-signaling-LSODA-LSODAR-SBML
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Vilar-PNAS-2002-minimal-circardian-clock-discrete-NRM
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Vilar-PNAS-2002-minimal-circardian-clock-discrete-SSA
  • results_report.SimulatorGeneratesReportsOfSimulationResults
  • sedml.SimulatorCanResolveModelSourcesDefinedByUriFragments
  • sedml.SimulatorCanResolveModelSourcesDefinedByUriFragmentsAndInheritChanges
  • sedml.SimulatorProducesLinear2DPlots
  • sedml.SimulatorProducesLogarithmic2DPlots
  • sedml.SimulatorProducesMultiplePlots
  • sedml.SimulatorProducesReportsWithCuratedNumberOfDimensions
  • sedml.SimulatorSupportsAddReplaceRemoveModelElementChanges
  • sedml.SimulatorSupportsAlgorithmParameters
  • sedml.SimulatorSupportsComputeModelChanges
  • sedml.SimulatorSupportsDataGeneratorsWithDifferentShapes
  • sedml.SimulatorSupportsDataSetsWithDifferentShapes
  • sedml.SimulatorSupportsModelAttributeChanges
  • sedml.SimulatorSupportsModelsSimulationsTasksDataGeneratorsAndReports
  • sedml.SimulatorSupportsMultipleReportsPerSedDocument
  • sedml.SimulatorSupportsMultipleTasksPerSedDocument
  • sedml.SimulatorSupportsRepeatedTasksWithChanges
  • sedml.SimulatorSupportsRepeatedTasksWithFunctionalRangeVariables
  • sedml.SimulatorSupportsRepeatedTasksWithFunctionalRanges
  • sedml.SimulatorSupportsRepeatedTasksWithLinearUniformRanges
  • sedml.SimulatorSupportsRepeatedTasksWithLogarithmicUniformRanges
  • sedml.SimulatorSupportsRepeatedTasksWithMultipleSubTasks
  • sedml.SimulatorSupportsRepeatedTasksWithNestedFunctionalRanges
  • sedml.SimulatorSupportsRepeatedTasksWithNestedRepeatedTasks
  • sedml.SimulatorSupportsRepeatedTasksWithSubTasksOfMixedTypes
  • sedml.SimulatorSupportsRepeatedTasksWithVectorRanges
  • sedml.SimulatorSupportsSubstitutingAlgorithms
  • sedml.SimulatorSupportsUniformTimeCoursesWithNonZeroInitialTimes
  • sedml.SimulatorSupportsUniformTimeCoursesWithNonZeroOutputStartTimes

• Failed 0 test cases

• Skipped 20 test cases:

  • published_project.SimulatorCanExecutePublishedProject:bngl/Dolan-PLoS-Comput-Biol-2015-NHEJ
  • published_project.SimulatorCanExecutePublishedProject:bngl/test-bngl
  • published_project.SimulatorCanExecutePublishedProject:cellml/Lorenz-system
  • published_project.SimulatorCanExecutePublishedProject:neuroml-lems/Hodgkin-Huxley-cell-CVODE
  • published_project.SimulatorCanExecutePublishedProject:neuroml-lems/Hodgkin-Huxley-cell-Euler
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Caravagna-J-Theor-Biol-2010-tumor-suppressive-oscillations
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Ciliberto-J-Cell-Biol-2003-morphogenesis-checkpoint-Fehlberg
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Ciliberto-J-Cell-Biol-2003-morphogenesis-checkpoint-continuous
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Edelstein-Biol-Cybern-1996-Nicotinic-excitation
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Parmar-BMC-Syst-Biol-2017-iron-distribution
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Szymanska-J-Theor-Biol-2009-HSP-synthesis
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Vilar-PNAS-2002-minimal-circardian-clock
  • published_project.SimulatorCanExecutePublishedProject:sbml-core/Vilar-PNAS-2002-minimal-circardian-clock-continuous
  • published_project.SimulatorCanExecutePublishedProject:sbml-fbc/Escherichia-coli-core-metabolism
  • published_project.SimulatorCanExecutePublishedProject:sbml-qual/Chaouiya-BMC-Syst-Biol-2013-EGF-TNFa-signaling
  • published_project.SimulatorCanExecutePublishedProject:sbml-qual/Irons-J-Theor-Biol-2009-yeast-cell-cycle
  • published_project.SimulatorCanExecutePublishedProject:smoldyn/Lotka-Volterra
  • published_project.SimulatorCanExecutePublishedProject:xpp/Wu-Biochem-Pharmacol-2006-pituitary-GH3-cells
  • sedml.SimulatorProducesLinear3DPlots
  • sedml.SimulatorProducesLogarithmic3DPlots

[biosimulators-daemon]

Warnings

cli.CliDescribesSupportedEnvironmentVariablesInline (3.5 s)

Test that the inline help for a command-line interface describes the environment variables that the simulator supports.

Warnings:

  The inline help for a command-line interface for a simulation tool should describe the environment variables that the simulation tool supports.

  The command-line interface does not describe the following standard environment variables recognized by BioSimulators:
    - 'ALGORITHM_SUBSTITUTION_POLICY'

  If the simulation tool implements these variables, they should be described in the inline help for its command-line interface.

  Note, support for these environment variables is optional. Simulation tools are not required to support these variables.

Log:

docker_image.HasBioContainersLabels (0.3 s)

Test that a Docker image has BioContainers labels with metadata about the image

Warnings:

  The Docker image should have the following BioContainers labels:
    extra.identifiers.biotools

Log:

published_project.SimulatorCanExecutePublishedProject:sbml-core/Tomida-EMBO-J-2003-NFAT-translocation (4.3 s)

Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000560

  Warnings:

  Unexpected reports were produced:
  BIOMD0000000678_sim.sedml/Figure_3c

  Plots were not produced:
  simulation.sedml/Figure_3c

  Extra plots were produced:
  BIOMD0000000678_sim.sedml/Figure_3c

  Log:

  /usr/local/lib/python3.9/site-packages/biosimulators_utils/warnings.py:31: BioSimulatorsWarning: The SED document is potentially incorrect.
  
  - Model `BIOMD0000000678` may be invalid.
  
    - The model file `BIOMD0000000678_url.xml` may be invalid.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <initialAssignment> <math> expression 'stim_duration' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <initialAssignment> <math> expression 'stim_frequency' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <assignmentRule> <math> expression '1 - NFAT_phosphorylated - NFAT_dephosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <assignmentRule> <math> expression '100 * NFAT_phosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <assignmentRule> <math> expression '100 * NFAT_transported' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <assignmentRule> <math> expression '100 * NFAT_dephosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <assignmentRule> <math> expression 'piecewise(1, lt(time - floor(time / ModelValue_13) * ModelValue_13, ModelValue_17), 0)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'Jurkat_cell * function_for_modified_reaction_1(NFAT_phosphorylated, k1, stimulus)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'Jurkat_cell * k2 * NFAT_dephosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'Jurkat_cell * k3 * NFAT_dephosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'Jurkat_cell * k4 * NFAT_transported' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k1' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k2' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k3' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k4' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'stim_frequency' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'dNFAT' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'pNFAT' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'tNFAT' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'stim_duration' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'ModelValue_17' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'ModelValue_13' does not have a 'units' attribute.
  
        
  
  warnings.warn(termcolor.colored(message, Colors.warning.value), category)
  
  /usr/local/lib/python3.9/site-packages/biosimulators_utils/warnings.py:31: BioSimulatorsWarning: The COMBINE/OMEX archive may be invalid.
  
  - The SED-ML file at location `./BIOMD0000000678_sim.sedml` may be invalid.
  
    - Model `BIOMD0000000678` may be invalid.
  
      - The model file `BIOMD0000000678_url.xml` may be invalid.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <initialAssignment> <math> expression 'stim_duration' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <initialAssignment> <math> expression 'stim_frequency' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <assignmentRule> <math> expression '1 - NFAT_phosphorylated - NFAT_dephosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <assignmentRule> <math> expression '100 * NFAT_phosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <assignmentRule> <math> expression '100 * NFAT_transported' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <assignmentRule> <math> expression '100 * NFAT_dephosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <assignmentRule> <math> expression 'piecewise(1, lt(time - floor(time / ModelValue_13) * ModelValue_13, ModelValue_17), 0)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'Jurkat_cell * function_for_modified_reaction_1(NFAT_phosphorylated, k1, stimulus)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'Jurkat_cell * k2 * NFAT_dephosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'Jurkat_cell * k3 * NFAT_dephosphorylated' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'Jurkat_cell * k4 * NFAT_transported' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k1' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k2' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k3' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k4' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'stim_frequency' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'dNFAT' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'pNFAT' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'tNFAT' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'stim_duration' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'ModelValue_17' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'ModelValue_13' does not have a 'units' attribute.
  
          
  
  warnings.warn(termcolor.colored(message, Colors.warning.value), category)
  
  Archive contains 1 SED-ML documents with 1 models, 1 simulations, 1 tasks, 1 reports, and 1 plots:
  
  BIOMD0000000678_sim.sedml:
  
    Tasks (1):
  
      BIOMD0000000678_task
  
    Reports (1):
  
      report: 5 data sets
  
    Plots (1):
  
      Figure_3c: 2 curves
  
  Executing SED-ML file 0: BIOMD0000000678_sim.sedml ...
  
  Bundling outputs ...
  
  Cleaning up ...
  
  ============= SUMMARY =============
  
  Executed 1 SED documents:
  
  SED documents (1):
  
    Succeeded: 1
  
    Skipped: 0
  
    Failed: 0
  
  Tasks (1):
  
    Succeeded: 1
  
    Skipped: 0
  
    Failed: 0
  
  Outputs (2):
  
    Succeeded: 2
  
    Skipped: 0
  
    Failed: 0
  

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Varusai-Sci-Rep-2018-mTOR-signaling-LSODA-LSODAR-SBML (4.7 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000560

  Warnings:

  Unexpected reports were produced:
  LSODA.sedml/Figure_2c

  Log:

  
  /usr/local/lib/python3.9/site-packages/biosimulators_utils/warnings.py:31: BioSimulatorsWarning: The SED document is potentially incorrect.
  
  - Model `model` may be invalid.
  
    - The model file `Varusai2018.xml` may be invalid.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(IR, Km1, V1)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pIR, Km2, V2)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * HMM_Mod(k3c, IRS, pIR, Km3)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pIRS, Km4, V4)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Function_for_v5(k5ca, pIRS, Akt, Km5a, k5cb, pmTORC2, Km5b)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pAkt, Km6, V6)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * HMM_Mod(k7c, mTORC1, pAkt, Km7)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pmTORC1, Km8, V8)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * HMM_Mod(k9c, mTORC2, pIR, Km9)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pmTORC2, Km10, V10)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Function_for_v11(k11ca, pmTORC1, DEPTOR, Km11a, pDEPTOR, k11cb, pmTORC2, Km11b)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pDEPTOR, Km12, V12)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * (k13f * mTORC1 * DEPTOR - k13r * mTORC1_DEPTOR)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * (k14f * mTORC2 * DEPTOR - k14r * mTORC2_DEPTOR)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * HMM_Mod(k15c, IRS, pmTORC1, Km15)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(iIRS, Km16, V16)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * Constant_flux__irreversible(ks17)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
         The units of the <kineticLaw> <math> expression 'compartment * kd18 * pDEPTOR' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'V1' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km1' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'V2' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km2' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k3c' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km3' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'V4' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km4' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k5ca' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km5a' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k5cb' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km5b' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'V6' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km6' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k7c' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km7' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'V8' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km8' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k9c' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km9' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'V10' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km10' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k11ca' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km11a' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k11cb' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km11b' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'V12' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km12' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k13f' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k13r' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k14f' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k14r' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'k15c' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km15' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'V16' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'Km16' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'ks17' does not have a 'units' attribute.
  
      - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
         The <parameter> with the id 'kd18' does not have a 'units' attribute.
  
        
  
  warnings.warn(termcolor.colored(message, Colors.warning.value), category)
  
  /usr/local/lib/python3.9/site-packages/biosimulators_utils/warnings.py:31: BioSimulatorsWarning: The COMBINE/OMEX archive may be invalid.
  
  - The SED-ML file at location `./LSODA.sedml` may be invalid.
  
    - Model `model` may be invalid.
  
      - The model file `Varusai2018.xml` may be invalid.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(IR, Km1, V1)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pIR, Km2, V2)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * HMM_Mod(k3c, IRS, pIR, Km3)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pIRS, Km4, V4)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Function_for_v5(k5ca, pIRS, Akt, Km5a, k5cb, pmTORC2, Km5b)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pAkt, Km6, V6)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * HMM_Mod(k7c, mTORC1, pAkt, Km7)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pmTORC1, Km8, V8)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * HMM_Mod(k9c, mTORC2, pIR, Km9)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pmTORC2, Km10, V10)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Function_for_v11(k11ca, pmTORC1, DEPTOR, Km11a, pDEPTOR, k11cb, pmTORC2, Km11b)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(pDEPTOR, Km12, V12)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * (k13f * mTORC1 * DEPTOR - k13r * mTORC1_DEPTOR)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * (k14f * mTORC2 * DEPTOR - k14r * mTORC2_DEPTOR)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * HMM_Mod(k15c, IRS, pmTORC1, Km15)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Henri_Michaelis_Menten__irreversible(iIRS, Km16, V16)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * Constant_flux__irreversible(ks17)' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - In situations where a mathematical expression contains literal numbers or parameters whose units have not been declared, it is not possible to verify accurately the consistency of the units in the expression. 
  
           The units of the <kineticLaw> <math> expression 'compartment * kd18 * pDEPTOR' cannot be fully checked. Unit consistency reported as either no errors or further unit errors related to this object may not be accurate.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'V1' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km1' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'V2' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km2' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k3c' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km3' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'V4' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km4' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k5ca' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km5a' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k5cb' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km5b' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'V6' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km6' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k7c' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km7' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'V8' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km8' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k9c' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km9' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'V10' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km10' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k11ca' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km11a' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'k11cb' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to check the consistency of units and helps make it easier to detect potential errors in models.
  
           The <parameter> with the id 'Km11b' does not have a 'units' attribute.
  
        - As a principle of best modeling practice, the units of a <parameter> should be declared rather than be left undefined. Doing so improves the ability of software to c ...

[biosimulators-daemon]

Skips

published_project.SimulatorCanExecutePublishedProject:bngl/Dolan-PLoS-Comput-Biol-2015-NHEJ (0.0 s)

Required model formats and simulation algorithms for SED tasks:

• Format: format_3972 Algorithm: KISAO_0000263

  Reason for skip:

  Case requires model formats format_3972 and simulation algorithms KISAO_0000263

  Log:

  published_project.SimulatorCanExecutePublishedProject:bngl/test-bngl (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_3972 Algorithm: KISAO_0000019

  Reason for skip:

  Case requires model formats format_3972 and simulation algorithms KISAO_0000019

  Log:

  published_project.SimulatorCanExecutePublishedProject:cellml/Lorenz-system (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_3240 Algorithm: KISAO_0000019

  Reason for skip:

  Case requires model formats format_3240 and simulation algorithms KISAO_0000019

  Log:

  published_project.SimulatorCanExecutePublishedProject:neuroml-lems/Hodgkin-Huxley-cell-CVODE (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_9004 Algorithm: KISAO_0000019

  Reason for skip:

  Case requires model formats format_9004 and simulation algorithms KISAO_0000019

  Log:

  published_project.SimulatorCanExecutePublishedProject:neuroml-lems/Hodgkin-Huxley-cell-Euler (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_9004 Algorithm: KISAO_0000030

  Reason for skip:

  Case requires model formats format_9004 and simulation algorithms KISAO_0000030

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Caravagna-J-Theor-Biol-2010-tumor-suppressive-oscillations (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000019

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000019

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Ciliberto-J-Cell-Biol-2003-morphogenesis-checkpoint-Fehlberg (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000086

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000086

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Ciliberto-J-Cell-Biol-2003-morphogenesis-checkpoint-continuous (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000019

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000019

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Edelstein-Biol-Cybern-1996-Nicotinic-excitation (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000088

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000088

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Parmar-BMC-Syst-Biol-2017-iron-distribution (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_000019

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_000019

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Szymanska-J-Theor-Biol-2009-HSP-synthesis (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000496

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000496

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Vilar-PNAS-2002-minimal-circardian-clock (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000019

• Format: format_2585 Algorithm: KISAO_0000027

• Format: format_2585 Algorithm: KISAO_0000030

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000019, KISAO_0000027, KISAO_0000030

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-core/Vilar-PNAS-2002-minimal-circardian-clock-continuous (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000019

• Format: format_2585 Algorithm: KISAO_0000030

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000019, KISAO_0000030

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-fbc/Escherichia-coli-core-metabolism (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000437

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000437

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-qual/Chaouiya-BMC-Syst-Biol-2013-EGF-TNFa-signaling (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000449

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000449

  Log:

  published_project.SimulatorCanExecutePublishedProject:sbml-qual/Irons-J-Theor-Biol-2009-yeast-cell-cycle (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_2585 Algorithm: KISAO_0000449

  Reason for skip:

  Case requires model formats format_2585 and simulation algorithms KISAO_0000449

  Log:

  published_project.SimulatorCanExecutePublishedProject:smoldyn/Lotka-Volterra (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_9001 Algorithm: KISAO_0000057

  Reason for skip:

  Case requires model formats format_9001 and simulation algorithms KISAO_0000057

  Log:

  published_project.SimulatorCanExecutePublishedProject:xpp/Wu-Biochem-Pharmacol-2006-pituitary-GH3-cells (0.0 s)

  Required model formats and simulation algorithms for SED tasks:

• Format: format_9010 Algorithm: KISAO_0000019

  Reason for skip:

  Case requires model formats format_9010 and simulation algorithms KISAO_0000019

  Log:

  sedml.SimulatorProducesLinear3DPlots (0.2 s)

  Test that a simulator produces linear 3D plots

  Reason for skip:

  No curated COMBINE/OMEX archives are available to generate archives for testing

  Log:

  sedml.SimulatorProducesLogarithmic3DPlots (0.2 s)

  Test that a simulator produces logarithmic 3D plots

  Reason for skip:

  No curated COMBINE/OMEX archives are available to generate archives for testing

  Log:

[biosimulators-daemon]

The image for your simulator is valid!

[biosimulators-daemon]

Your submission was committed to the BioSimulators registry. Thank you!

Future submissions of subsequent versions of copasi to the BioSimulators registry will be automatically validated. These submissions will not require manual review by the BioSimulators Team.