Unsupported Firmware (Layout 206) is not yet supported

[rpisarew]

Describe the issue

I have two new Air 5in1 Boards. One of them works without any issues, but with the second I have a issue.

I have one esc where the configurator is not able to recognize the firmware version:

The esc is working in flights until now without any issues, I am just not able to update the firmware or configure.. Can I safely do something like a force flash to fix that, without bricking the esc?

Bluejay version

0.19

ESC variant

A-X-5

PWM frequency

96

DShot bitrate

300

Bidirectional DShot

On

FC firmware

Betaflight 4.5.1

Motor size

No response

Configurator debug log

1155:22336

115200 Open Port Selection

Disconnect

English Settings Hide Log 2024-09-17 @ 20:50:49 -- Done reading ESCs 2024-09-17 @ 20:50:49 -- Read ESC 4: A-X-5 - Bluejay, 0.19, 96kHz 2024-09-17 @ 20:50:49 -- Read ESC 3: A-X-5 - Bluejay, 0.19, 96kHz 2024-09-17 @ 20:50:49 -- Read ESC 2: A-X-5 - Bluejay, 0.19, 96kHz 2024-09-17 @ 20:50:49 -- Read ESC 1: UNKNOWN 2024-09-17 @ 20:50:49 -- Layout revision 206 is not yet supported 2024-09-17 @ 20:50:48 -- Trying to read 4 ESCs 2024-09-17 @ 20:50:24 -- Unique device ID received - 0x024004d4232500120303059 2024-09-17 @ 20:50:24 -- Board: SG47, version: 0 2024-09-17 @ 20:50:24 -- Running firmware released on: Aug 4 2024 19:03:57 2024-09-17 @ 20:50:24 -- Flight controller info, identifier: BTFL version: 4.5.1 2024-09-17 @ 20:50:24 -- MultiWii API version received: 1.46.0 2024-09-17 @ 20:50:24 -- Opened serial port 2024-09-17 @ 20:50:20 -- Plugged in 2024-09-17 @ 20:50:09 -- Chrome (128.0.0.0) on Mac OS

[stylesuxx]

You got it like this out of the box? I would RMA it. Technically you should be able to just flash A-X-5 to the on ESC and it should be fine.

[rpisarew]

You got it like this out of the box? I would RMA it. Technically you should be able to just flash A-X-5 to the on ESC and it should be fine.

Yes it was like that out of the box. I just tried the force flash and it fortunately worked :)