Closed bobc closed 12 years ago
A command such as G92 X100 should set X pos to 100, but always sets to zero. Same for X,Y etc.
Only in the case of G92 with no parameters should all coordinates be set to zero.
Reference: http://reprap.org/wiki/G-code#G92:_Set_Position
I've updated the code on gcode-process.
A command such as G92 X100 should set X pos to 100, but always sets to zero. Same for X,Y etc.
Only in the case of G92 with no parameters should all coordinates be set to zero.
Reference: http://reprap.org/wiki/G-code#G92:_Set_Position