Gs35 4 in 1

[ajharrop]

Can’t connect to blheli 32 configurator, I’m using Skitzo flight controller. I get error code 2

[4712]

Means, the system cannot find the specified serial port. Most likely wrong serial port is selected.

[ajharrop]

ive tried all the ports on my computer but it still doesn’t work

[4712]

How do you connect to configure the FC? Is it Raceflight? A screenshot might be helpful...

[ajharrop]

Raceflight one

[4712]

Sorry, for BLHeliSuite it is not possible to connect using RF. Raceflight does not support 4way-interface pass through, like Betaflight or Cleanflight.

[ajharrop]

How can I connect the gs35 4 in 1 to blheli with the usb? I’ve seen videos for the single esc’s but not the 4 in 1

[ajharrop]

Without the usb*

[4712]

4in1 is 4 ESC on one board. They still act as single ESC, means the have all one separate input wire to connect to the FC or another interface. I found some hints that RF has a mode to activate a 1-wire pass through mode for each single ESC channel.

[ajharrop]

Could you please share? I can’t find anything. When I use 1wire read nothing happens

[4712]

Ok, I thought, there is a 1-wire pass through mode (like in BF), but I guess, I was wrong..

[mikeller]

There is a simple solution: Just use Betaflight. ;-)

[ajharrop]

I prefer raceflight, I could use betaflight to configure my esc’s and then reflash rf1. That should work in theory as when you flash it’s only the fc right?

[mikeller]

Yeah, that would work - use the REVOLT target in Betaflight.