search

bitdump / BLHeli

BLHeli for brushless ESC firmware
GNU General Public License v3.0
1.96k stars 1.09k forks source link

Tekko32 F3 4in1 ESC 45A (Revision C) - electrical noise on video #486

Open maxgame91 opened 4 years ago

maxgame91 commented 4 years ago

Hello,

I have a this stack, but when I fly I have massive noise on the video (here a test without props, only pitch and roll movement)

So I read this post and update my esc with blheli 32.7.2 and still have the same problem.

I tried many vtx, camera, frame, but nothing change. I tried 48khz and 96khz but it's still the same I have a 1000uf 35v low esr directly solder to the xt60. camera and vtx are also on the xt60. And tried 4s and 6s Anyone have a solution with that ESC ? saw many problems

Best regards

theely commented 4 years ago

Hi, I have reported a similar issue #485, electrical noise is one of the symptoms however the main issue is the inability of the ESC to properly ramp up the motors. It might be possible that this issue is due to a production defect.

Would you have the possibility to take a DSHOT_RPM_Telemetry log and do a couple of half flips and rolls?

maxgame91 commented 3 years ago

Hi @theely I saw your report, thanks for details, I will rebuilt the drone, and do some flips and rolls

Keep you in touch