Christie not powering off

[mick76hd]

The Power ON command works for our Christie WU12K. The Power OFF command, however, does not.

[McHauge]

@mick76hd what does the power off do? nothing at all? be aware that the power off option is only power down to standby and can take up to 5 minutes do to the cooldown time of the lamp in the projector

[mick76hd]

Thanks for the follow up. The power off command does nothing that I can see. I tried hitting it twice to see if was a Standby or double button press type thing to power off. It just seems to have no effect. The On Command works perfectly.

Mickey Lyons Director of Technical Ministries

[cid:image002.jpg@01D22F93.37C2B190]

770.380.5852 mlyons@mountpisgah.orgmailto:mlyons@mountpisgah.org | mountpisgah.orghttp://mountpisgah.org

On Nov 5, 2019, at 3:57 AM, Andreas Thomsen notifications@github.com<mailto:notifications@github.com> wrote:

@mick76hdhttps://github.com/mick76hd what does the power off do? nothing at all? be aware that the power off option is only power down to standby and can take up to 5 minutes do to the cooldown time of the lamp in the projector

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/bitfocus/companion-module-christiepj/issues/2?email_source=notifications&email_token=ANQUX7YZIRNR52NAZN4NG4TQSEYPVA5CNFSM4JCB4LNKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDCCS3A#issuecomment-549726572, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANQUX75F5W7BZZOZ3NXQSZLQSEYPVANCNFSM4JCB4LNA.

[McHauge]

@mick76hd I'm currently working on expanding this module, and would you be able to test if the shutter and power button work in a test build. it can be run without an install on windows, you can find it at this link: https://1drv.ms/f/s!AtUYbExJseNtlK56u-n71V_UcLDe7g

[McHauge]

@mick76hd Hi, again, just added some feedback options to the module and if you had a chance to test it that would be awesome, you can find a compiled version at the link above. you might need to press some buttons to get the feedback to run. Still, need to set up some way to collect current values at startup.

-McHauge

[mick76hd]

Just tested it. Off now works and so does shutter. Thanks!

Mickey Lyons | Technical Director Mount Pisgah United Methodist Church c. 770.380.5852 e. mlyons@mountpisgah.orgmailto:mlyons@mountpisgah.org w. mountpisgah.orghttp://www.mountpisgah.org/

On Nov 8, 2019, at 7:56 PM, Andreas Thomsen notifications@github.com wrote:



@mick76hdhttps://github.com/mick76hd Hi, again, just added some feedback options to the module and if you had a chance to test it that would be awesome, you can find a compiled version at the link above. you might need to press some buttons to get the feedback to run. Still, need to set up some way to collect current values at startup.

-McHauge

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/bitfocus/companion-module-christiepj/issues/2?email_source=notifications&email_token=ANQUX7YCKWRQ2XZMTBFQDQDQSYDDJA5CNFSM4JCB4LNKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDTZFAY#issuecomment-552047235, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANQUX757M36ZGHGZZQJ5A7LQSYDDJANCNFSM4JCB4LNA.

[McHauge]

@mick76hd that's awesome to hear how about the feedbacks do they react as expected? first time doing feedback so not to sure myself

-Andreas

[mick76hd]

I’m not sure I understand what feedbacks are. I just setup the ON and Off Commands with 3 IP addresses of Projectors to turn them all on and off together. I setup an quick button with a Toggle on it to test the shutter.

Mickey Lyons Director of Technical Ministries

[cid:image002.jpg@01D22F93.37C2B190] 770.380.5852 mlyons@mountpisgah.orgmailto:mlyons@mountpisgah.org | mountpisgah.orghttp://mountpisgah.org

On Nov 13, 2019, at 3:40 PM, Andreas Thomsen notifications@github.com<mailto:notifications@github.com> wrote:

@mick76hdhttps://github.com/mick76hd that's awesome to hear how about the feedbacks do they react as expected? first time doing feedback so not to sure myself

-Andreas

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/bitfocus/companion-module-christiepj/issues/2?email_source=notifications&email_token=ANQUX72ESGUMP7RH7V7VMVTQTRQ3JA5CNFSM4JCB4LNKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOED7SLXY#issuecomment-553592287, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANQUX74V47AEQ4TW4MXQWSDQTRQ3JANCNFSM4JCB4LNA.

[McHauge]

if you are on the build i made today, there should be presets for it, that will change colors depending on the current state

[McHauge]

there is a set of monitor presets under the tab 'presets' -> 'status'

[McHauge]

[McHauge]

@mick76hd you should be able to just drag and drop them onto the buttons layout, but you need to enable error messages on the projector (preset for it under commands)

[mick76hd]

Very cool. I’ll try it out tomorrow.

Mickey Lyons | Technical Director Mount Pisgah United Methodist Church c. 770.380.5852 e. mlyons@mountpisgah.orgmailto:mlyons@mountpisgah.org w. mountpisgah.orghttp://www.mountpisgah.org/

On Nov 13, 2019, at 3:58 PM, Andreas Thomsen notifications@github.com wrote:



@mick76hdhttps://github.com/mick76hd you should be able to just drag and drop them onto the buttons layout, but you need to enable error messages on the projector (preset for it under commands)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/bitfocus/companion-module-christiepj/issues/2?email_source=notifications&email_token=ANQUX747VRJNTL2GZPPFMKDQTRS7JA5CNFSM4JCB4LNKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOED7UC4Q#issuecomment-553599346, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANQUX732UYCFVSY5DLZAD5LQTRS7JANCNFSM4JCB4LNA.

[josephdadams]

Closing this out as it looks like this is completed.