search

bitfocus / companion-module-figure53-qlab-advance

MIT License
4 stars 8 forks source link

Elapsed & Remaining time feedback variable stops when playing a looping playlist. #125

Closed Matchaow closed 4 months ago

Matchaow commented 5 months ago

Hi,

Elapsed & remaining cuehead time feedback stops at 0:00 for a looping playlist. Works fine for the first loop but then doesn't reset and count down/up again. I think this is because the feedback comes from the first cue in the list which is the group header that only counts down once. and the cues inside carry on underneath this cue in the active cuestack.

Companion 3.2.2 - Raspberry Pi Qlab 5.3.8 - macOS Sonoma14.3 / Monterey 12.7.5

Thanks Matt

istnv commented 5 months ago

Have you tried Companion 3.3? There were several recent updates that were not in 3.2

Matchaow commented 5 months ago

Not yet,

That popped up as a new version half way through the Job, I’ll report back if there same issue occurs on 3.3

Thanks for the replies!

Matt

From: John Knight Jr @.> Sent: Tuesday, May 21, 2024 6:15 PM To: bitfocus/companion-module-figure53-qlab-advance @.> Cc: Matchaow @.>; Author @.> Subject: Re: [bitfocus/companion-module-figure53-qlab-advance] Elapsed & Remaining time feedback variable stops when playing a looping playlist. (Issue #125)

Have you tried Companion 3.3? There were several recent updates that were not in 3.2

— Reply to this email directly, view it on GitHub https://github.com/bitfocus/companion-module-figure53-qlab-advance/issues/125#issuecomment-2123082952 , or unsubscribe https://github.com/notifications/unsubscribe-auth/BDIJO3UG4YTXE74H4C4NNZ3ZDN6HNAVCNFSM6AAAAABIBDJWFKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMRTGA4DEOJVGI . You are receiving this because you authored the thread. https://github.com/notifications/beacon/BDIJO3QAH5WSBXYSNUADX3LZDN6HNA5CNFSM6AAAAABIBDJWFKWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTT6ROWMQ.gif Message ID: @. @.> >