search

bitfocus / companion-module-novastar-controller

This module controls some Novastar devices.
MIT License
16 stars 15 forks source link

[Request] Single Percent Brightness Control for Novastar #46

Closed sebastienbaedis closed 12 months ago

sebastienbaedis commented 1 year ago

Hello,

I have a setup with a LED WALL controlled by a Novastar VX600 where I need to adapt the brightness depending on the event and set it to either 3% or 10%. The controller is not easy to access in this installation so I wanted to do it trough Companion, but I can only increment by steps of 10%. Could this be changed to allow brightness controll on a single digit level?

Thank you in advance

istnv commented 1 year ago

@sebastienbaedis Are you able to test a custom module? I think I have a way to allow brightness adjustments in 0.5% increments but I do not have access to any controllers this week.

sebastienbaedis commented 1 year ago

Hello,

Yes I am! That would be perfect. What do I have to do?

Thank you Von meinem iPhone gesendet

Am 16.11.2023 um 06:13 schrieb John Knight Jr @.***>:



@sebastienbaedishttps://github.com/sebastienbaedis Are you able to test a custom module? I think I have a way to allow brightness adjustments in 0.5% increments but I do not have access to any controllers this week.

— Reply to this email directly, view it on GitHubhttps://github.com/bitfocus/companion-module-novastar-controller/issues/46#issuecomment-1813800873, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AWRBCIBMDIOMLN2ZLYJAE5LYEWOGLAVCNFSM6AAAAAA6UKJ7A6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMJTHAYDAOBXGM. You are receiving this because you were mentioned.Message ID: @.***>

istnv commented 1 year ago

@sebastienbaedis You need to be running at least the latest stable (v3.1.2) companion. What operating system are you using? (Mac, Windows, Linux, Pi)

sebastienbaedis commented 1 year ago

I‘m running Companion on Windows and the 3.2.0 latest beta.

Von meinem iPhone gesendet

Am 16.11.2023 um 18:24 schrieb John Knight Jr @.***>:



@sebastienbaedishttps://github.com/sebastienbaedis You need to be running at least the latest stable (v3.1.2) companion. What operating system are you using? (Mac, Windows, Linux, Pi)

— Reply to this email directly, view it on GitHubhttps://github.com/bitfocus/companion-module-novastar-controller/issues/46#issuecomment-1814904455, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AWRBCICNG3BYUC2FTSPBWPLYEZD5RAVCNFSM6AAAAAA6UKJ7A6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMJUHEYDINBVGU. You are receiving this because you were mentioned.Message ID: @.***>

istnv commented 1 year ago

@sebastienbaedis I've added a new command. Should be in the next beta build if you can test it. Set Brightness that lets you enter the percentage you want.

sebastienbaedis commented 12 months ago

Hello,

I’ve just donwloaded the latest beat and can confirm it works! Thank you so much!

Sebastien Baedis

@.*** +352 661 152 020

3, rue de Martelange L-8833 Wolwelange Luxembourg

Am 17.11.2023 um 06:06 schrieb John Knight Jr @.***>:

I've added a new command. Should be in the next beta build Set Brightness that lets you enter the percentage you want.

— Reply to this email directly, view it on GitHubhttps://github.com/bitfocus/companion-module-novastar-controller/issues/46#issuecomment-1815754518, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AWRBCIEUTSPU47VNRON4CU3YE3WEHAVCNFSM6AAAAAA6UKJ7A6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMJVG42TINJRHA. You are receiving this because you were mentioned.Message ID: @.***>