Initial Sign On Problem

[techhillcountrychapel]

I'm trying to start your software but run into a problem that we can't figure ou. After the red box sign on that appears to recognize out network I click gui and it goes to the next screen but won;t connect and give us an error message I have attached. Thanks for putting us in the right direction. We are anxious to use your software with OBS and Stream Deck. Thank You Ron Moore Chapel of the HIlls

[bryce-seifert]

If you click on the OBS connection, you should be able to enter the IP address of your OBS computer and the websocket port. If it is on the same machine, the address will be 127.0.0.1. The websocket port can be found in OBS by going to Tools > WebSocket Server settings.

Here's an example of the a properly filled out configuration:

[techhillcountrychapel]

Bryce: Followed your note but does it require a password. and if it does. which server? I tried without the password and it came up under connections as "1 connections are hidden" How do I unhide? Thanks Ron Moore

Robert Rudd

Administrative Director

[cid:f28731fb-ad79-4435-ad3c-ba6116b7748e]

Chapel of the Hills Baptist Church

19135 TX Hwy 29

PO Box 966

Buchanan Dam, TX 78609

512-793-2453

---

From: bryce @.> Sent: Monday, July 29, 2024 7:50 PM To: bitfocus/companion-module-obs-studio @.> Cc: Even Smith @.>; Author @.> Subject: Re: [bitfocus/companion-module-obs-studio] Initial Sign On Problem (Issue #276)

If you click on the OBS connection, you should be able to enter the IP address of your OBS computer and the websocket port. If it is on the same machine, the address will be 127.0.0.1. The websocket port can be found in OBS by going to Tools > WebSocket Server settings.

Here's an example of the a properly filled out configuration:

Screenshot.2024-07-29.at.7.48.31.PM.png (view on web)https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_user-2Dattachments_assets_835cc0f3-2Dfe77-2D4a43-2D9236-2Dccb51f7b4e49&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=Jcp-lw14H97xhbMKHxR16XPCCpKq5NhLgQ_qP3lK188&m=sHbySyEznlPyCq_1Vm_YuDT0vG_vtgGIN27AjkhGxCmq4YAeWyzV1MsPu9DIbFr-&s=PzBGd_Gj9QgPBHbohtLW-DjGKK97WvjEOfepArgoVwc&e=

— Reply to this email directly, view it on GitHubhttps://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_bitfocus_companion-2Dmodule-2Dobs-2Dstudio_issues_276-23issuecomment-2D2257257019&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=Jcp-lw14H97xhbMKHxR16XPCCpKq5NhLgQ_qP3lK188&m=sHbySyEznlPyCq_1Vm_YuDT0vG_vtgGIN27AjkhGxCmq4YAeWyzV1MsPu9DIbFr-&s=10aaDd8zcoieVQIG6bXIYPQ_YeuV71hhjWwos6LDob0&e=, or unsubscribehttps://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_notifications_unsubscribe-2Dauth_BJ5T5G254S7ACN52MOX3T4DZO3PL3AVCNFSM6AAAAABLUXLMHOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJXGI2TOMBRHE&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=Jcp-lw14H97xhbMKHxR16XPCCpKq5NhLgQ_qP3lK188&m=sHbySyEznlPyCq_1Vm_YuDT0vG_vtgGIN27AjkhGxCmq4YAeWyzV1MsPu9DIbFr-&s=gsnM5skC2DKahVe-QjrlohPpIuk221nLl9gRglaRqn0&e=. You are receiving this because you authored the thread.Message ID: @.***>

[bryce-seifert]

Followed your note but does it require a password. and if it does. which server?

It does not require one, unless there is one set in WebSocket Server settings. You can check this in OBS by going to Tools > WebSocket Server settings. If Enable Authentication is checked, it will need a password. The "Server Password" should be entered into the module if this is the case. If not, you can leave the module password box blank.

came up under connections as "1 connections are hidden"

It looks like you are hiding connections that are showing an "error". To unhide them, in companion make sure all of the tabs next to status are selected and not greyed out.

[bryce-seifert]

@techhillcountrychapel were you able to get connected?