search

bitfocus / companion-module-panasonic-cameras

MIT License
7 stars 2 forks source link

Instructions on how to set up the CX350 camera #16

Closed TomEagle closed 1 month ago

TomEagle commented 1 month ago

Do you have any instructions on how to set up the CX350 camera to work with Companion-Module-Cameras?

I am getting there, slowly.. Thanks, Tom Eagle

premultiply commented 1 month ago

See https://eww.pass.panasonic.co.jp/pro-av/support/content/guide/DEF/CX350_CX4000_Command_for_PTZ_Control_Protocol.pdf Page 4:

image
TomEagle commented 1 month ago

Where do you set user and password in companion OR do you not set them in the cx350?

I am missing something to get it to work.

I have read p. 4 before.

Thanks, Tom

On Thu, Sep 19, 2024, 1:08 AM premultiply @.***> wrote:

See https://eww.pass.panasonic.co.jp/pro-av/support/content/guide/DEF/CX350_CX4000_Command_for_PTZ_Control_Protocol.pdf Page 4: image.png (view on web) https://github.com/user-attachments/assets/2deed8bc-850c-4961-ab68-5a3a1b957dfb

— Reply to this email directly, view it on GitHub https://github.com/bitfocus/companion-module-panasonic-cameras/issues/16#issuecomment-2360056383, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB4PB25WBXIIR3NYQNDRIYTZXJS6PAVCNFSM6AAAAABOO7SYP6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNRQGA2TMMZYGM . You are receiving this because you authored the thread.Message ID: @.*** com>

premultiply commented 1 month ago

There is no password for the used protocol. Just enable remote control and go for it. Enter the LAN or WiFi IP of the camera and it should connect.