Open Pepito-06 opened 3 years ago
What are you looking to do?
@McHauge any similarity to the other Panasonic devices you've worked with?
Don't think so, from what I can see/find, it only does Serial communication, even though it has an ethernet jack...
What are you looking to do?
I was hoping we could be able to switch sources remotely, do basic liveswitcher operations for automatization.
@Pepito-06 If you can find any documentation that suggests that is possible then we can look at it, but after having a search through Panasonic dev/documentation website (behind the password lock) I can't find anything except firmware update over ethernet.
have you seen the HS450 being controlled remotely over ethernet before?
One thing that's definitely possible is to control it with a TCP -> Serial converter, as the HS450 supports serial control with no problem.
Maybe you could connect the computer running Companion to it and use the generic-serial module?
@Pepito-06 If you can find any documentation that suggests that is possible then we can look at it, but after having a search through Panasonic dev/documentation website (behind the password lock) I can't find anything except firmware update over ethernet.
have you seen the HS450 being controlled remotely over ethernet before?
One thing that's definitely possible is to control it with a TCP -> Serial converter, as the HS450 supports serial control with no problem.
There's a definitely a way to control HS450 over ethernet but I'm afraid the protocol is still unknown. The only device that was able to work with it was now deprecated Venetex VS-R45E: https://www.venetex.jp/wp-content/uploads/2015/03/VS-R45E_3.0b.pdf
The control software and documentation mentions multicast communication on 224.0.0.200 apart from the IP port of the mixer (i'm guessing all the tally notifications go the multicast route).
Dear Community,
Would it be possible to integer a module for the Live TV Switcher Panasonic AV-HS450 ?
That would be extremely useful.
Let me know !
Best Regards,
Gautier