[M1][High] prepare BH0.2A layout

muzi-15 commented 9 years ago

output: layout documents

onceme commented 9 years ago

When can we start reviewing? Could you maintain this layout file somewhere in the repo? So everyone can easily have a copy

onceme commented 8 years ago

My review comments to Layout so far:

Where is "BH" logo on the board?
P5 "PWMX" label looks wrong for the new added three, so as to label of its pin heads
P5 needs "+","-","Sig" label
Connect all the middle of the pins in P5 to 5V
Single color leds could be more closer if moving label R7~R9, D4~D6 aside
P6 instruction label is missing
I think P6 pin matrix should be the following, why seems different now?

Single colors please refer here: APM 2.5 leds
- A (GPIO-17, D4): red
- B (GPIO-18, D5): yellow
- C (GPIO-22, D6): blue
- GPS (D2): blue
Introduce PWM 12?
Replace AT24C02 to AT24C16?
The 2*20 pin connector, we can cut the pins to suit the size, so the board size remains HAT size. Best fit refer here

droneboost commented 8 years ago

Close 9/29 PM10:12

bithollow / bitforge