Schaltungsvariante "spiegelverkehrt"

Hallo Bernd,

beim Zusammenlöten meiner Matrix habe ich nicht darauf geachtet, dass deine Bilder unter Concepts und wiring layout von hinten abgebildet waren. Meine Variante benötigt daher eine spiegelverkehrte wiring.py

Habe diese erstellt und würde mich freuen wenn du die in den Code einbauen kannst - dann kann ich mit git zukünftige Änderungen mitbekommen.


class timos_wiring:
    '''
    A class, holding all information of the wordclock's layout to map given
    timestamps, 2d-coordinates to the corresponding LEDs (corresponding to
    the individual wiring/layout of any wordclock).
    If a different wordclock wiring/layout is chosen, this class needs to be
    adopted.
    '''

    def __init__(self):

        # LED strip configuration:
        self.LED_COUNT   = 114     # Number of LED pixels.
        self.LED_PIN     = 18      # GPIO pin connected to the pixels (must support PWM!).
        self.LED_FREQ_HZ = 800000  # LED signal frequency in hertz (usually 800khz)
        self.LED_DMA     = 5       # DMA channel to use for generating signal (try 5)
        self.LED_INVERT  = False   # True to invert the signal (when using NPN transistor level shift)

        self.WCA_WIDTH   = 11      # Wordclock array width
        self.WCA_HEIGHT  = 10      # Wordclock array height

    def setColorBy1DCoordinates(self, strip, ledCoordinates, color):
        '''
        Linear mapping from top-left to bottom right
        '''
        for i in ledCoordinates:
            self.setColorBy2DCoordinates(strip, i%self.WCA_WIDTH, i/self.WCA_WIDTH, color)

    def setColorBy2DCoordinates(self, strip, x, y, color):
        '''
        Mapping coordinates to the wordclocks display
        Needs hardware/wiring dependent implementation
        Final range:
             (0,0): top-left
             (self.WCA_WIDTH-1, self.WCA_HEIGHT-1): bottom-right
        '''
        if x%2 == 0:                    # even columns 0,2,4...
            pos = (x)*self.WCA_HEIGHT+y+2               # last +2 for the minute LEDs before the WCA
        else:                           # odd columns 1,3,5...
            pos = (self.WCA_HEIGHT)+(self.WCA_HEIGHT*x)-y+1

        strip.setPixelColor(pos, color)

    def mapMinutes(self, min):
        '''
        Access minutes (1,2,3,4)
        Needs hardware/wiring dependent implementation
        This implementation assumes the minutes to be wired as first and last two leds of the led-strip
        '''
        if min == 1:
            return 1
        elif min == 2:
            return 113
        elif min == 3:
            return 112
        elif min == 4:
            return 0
        else:
            print('WARNING: Out of range, when mapping minutes...')
            print(min)
            return 0

    def getMinuteIndices(self):
        '''
        Returns all indices of the led strip, which are representing minutes
        .. todo:: Merge/unify with mapMinutes
        '''
        return [1, 113, 112, 0]

    def getWcaIndices(self):
        '''
        Returns all indices of the led strip, which are part of the word clock array
        '''
        return range(2, self.LED_COUNT-2)

bk1285 / rpi_wordclock

Schaltungsvariante "spiegelverkehrt" #3