Its not writing to the partition

[NeonzGamingYT]

I dont know if it was the firehorse problem or the phone itself or firmware but it wasn't writing the file to its partition My device is a vivo Y11

Capstone library is missing (optional).
Keystone library is missing (optional).
Qualcomm Sahara / Firehose Client V3.60 (c) B.Kerler 2018-2022.
main - Trying with no loader given ...
main - Waiting for the device
......
main - Hint:   Press and hold vol up+dwn, connect usb. For some, only use vol up.
main - Xiaomi: Press and hold vol dwn + pwr, in fastboot mode connect usb.
        Run "./fastpwn oem edl".
main - Other:  Run "adb reboot edl".

main - Device detected :)
sahara - Protocol version: 2, Version supported: 1
main - Mode detected: sahara
sahara - 
------------------------
HWID:              0x000bf0e100000000 (MSM_ID:0x000bf0e1,OEM_ID:0x0000,MODEL_ID:0x0000)
CPU detected:      "SDM439"
PK_HASH:           0x60ba997fef6da9f05885fa11f1dd6d2a90d052a257a09c2075d7246cc73c0d43
Serial:            0x35e7bf45

sahara - Detected loader: /home/neonz/Downloads/LinuxUnbrick/edl/edlclient/../Loaders/vivo/000bf0e100000000_60ba997fef6da9f0_fhprg_peek.bin
sahara - Protocol version: 2, Version supported: 1
sahara - Uploading loader /home/neonz/Downloads/LinuxUnbrick/edl/edlclient/../Loaders/vivo/000bf0e100000000_60ba997fef6da9f0_fhprg_peek.bin ...
sahara - 32-Bit mode detected.
sahara - Firehose mode detected, uploading...
sahara - Loader successfully uploaded.
main - Trying to connect to firehose loader ...
firehose_client
firehose_client - [LIB]: No --memory option set, we assume "eMMC" as default ..., if it fails, try using "--memory" with "UFS","NAND" or "spinor" instead !
firehose - TargetName=MSM8937
firehose - MemoryName=eMMC
firehose - Version=1
firehose - Trying to read first storage sector...
firehose - Running configure...
firehose - Storage report:
firehose - total_blocks:61071360
firehose - block_size:512
firehose - page_size:512
firehose - num_physical:3
firehose - mfr_id:21
firehose - serial_num:1455084650
firehose - fw_version:9
firehose - mem_type:eMMC
firehose - prod_name:GX6BAB
firehose_client - Supported functions:
-----------------
firehose - 
Writing to physical partition 0, sector 557312, sectors 131071
Done |--------------------------------------------------|   0.0% Write (Sector 0x0 of 0x1FFFF) 0.00 MB/s
Wrote /home/neonz/Downloads/Vivo_Y11_2019_PD1906_120720_QFIL/Firmware/boot.bin to sector 557312.

Someone said that it need auth

[NeonzGamingYT]

I tried edl qfil, it also giving the same error

[bkerler]

If edl auth or vip programming is needed, then there is no way to bypass that for now.

[NeonzGamingYT]

Okay 👍