Open LucifarSaten opened 1 year ago
同
I experience the same speed issue with Xiaomi A3. Smaller partitions are flashed quite quickly, ~10MB/s But large partition takes very long to flash, speed drops to 0.05MB/s
I decided to check what happens and waited 3 weeks for process to complete :)
That was the longest estimation:
Progress: |█████████-----------------------------------------| 17.4% Write (Sector 0x6F0A4 of 0x280000, 1007h:00m:03s left) 0.00 MB/s
But at some point after 3 weeks it began to speedup and eventually completed.
However, there was this failure:
Progress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x27FFF8 of 0x280000, ) 11.37 MB/s
Progress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x27FFFC of 0x280000, ) 11.36 MB/s
Progress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x280000 of 0x280000, ) 11.37 MB/s
firehose_client - [qfil] programming ./gpt_main0.bin to partition(0)@sector(0)...
firehose -
Writing to physical partition 0, sector 0, sectors 6
Done |--------------------------------------------------| 0.0% Write (Sector 0x0 of 0x6) 0.00 MB/s Progress: |█████████████████████████████████-----------------| 66.7% Write (Sector 0x4 of 0x6, ) 3.89 MB/s Progress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x6 of 0x6, ) 8.63 MB/s
firehose_client - [qfil] programming ./gpt_backup0.bin to partition(0)@sector(14501911)...
firehose -
Writing to physical partition 0, sector 14501911, sectors 5
Done |--------------------------------------------------| 0.0% Write (Sector 0x0 of 0x5) 0.00 MB/s Progress: |████████████████████████████████████████----------| 80.0% Write (Sector 0x4 of 0x5, ) 11.10 MB/s Progress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x5 of 0x5, ) 9.06 MB/s
firehose
firehose - [LIB]: Error:
firehose
firehose - [LIB]: ERROR: UFS Error -5 (3)
firehose
firehose - [LIB]: ERROR: Write Failed sector 14501911, size 4 result 3
firehose_client - [qfil] raw programming ok.
firehose_client - [qfil] patching...
firehose_client - [qfil] patching with patch0.xml
...
After flashing the rest of the files the device does not boot and stays in edl mode.
I will seek into this issue.
Same issue here on oneplus 6. Dropping to .1 MB/s around 40% through flashing. Will let it do its thing, see what happens and report back when.
Using USB3.0 compatible cable I get more than 2x speed up. 4MB/s->10MB/s on average. Peaking at 16MB/s
F lasing My Redmi Note 8 (ginkgo) with write speed maximum 3MB/s . That is too long for flashing. Any One know how to increase my write speed I'm using flashing cmd (edl qfail .
My operation system is Kali Rolling 64bits.