Problem using edl under windows os

[parzival1986]

Hi. I keep getting this error any solution?

Capstone library is missing (optional). Keystone library is missing (optional). No module named 'Cryptodome' Qualcomm Sahara / Firehose Client V3.60 (c) B.Kerler 2018-2022. main main - [LIB]: ←[33mPlease first install libusb_win32 driver from Zadig←[0m main - Trying with no loader given ... main - Waiting for the device Detected 0x5c6:0x9008 device at: COM31 main - Device detected :) DeviceClass - Warning ! main - Mode detected: sahara

there is no after. Everything that needs to be installed is installed.

[git9t2]

I got same error when using --serial or com command on windows. My driver is updated no yellow exclamatory mark and found device vid pid using Usbdkcontroler -n But all time stuck on mode detected -sahara. Please resolve the issue sir.

[transfluxor]

I had the same problem in Windows 10. The solution was simple - I burned the Live DVD to a USB flash drive and I'm working with it.

[parzival1986]

I had the same problem in Windows 10. The solution was simple - I burned the Live DVD to a USB flash drive and I'm working with it.

Hımm. I think it might be related to the latest Windows update. I haven't tried it on a clean install.

[transfluxor]

I meant live DVD V4, the link to which is on the main page of EDL. This is Xubuntu, a bootable flash drive is good because you can work anywhere you can boot from it, you don’t need to install anything on your PC.

[44yu5h]

@git9t2 make sure there is no exclamation mark. Install the signed drivers from edl/Drivers/Windows

[44yu5h]

@parzival1986 You have not installed all the files. See the Readme file and execute the respective commands.

Also

Please first install libusb_win32 driver from Zadig

You have not installed the libusb driver.

\ Follow THIS if you are having trouble.

You can close the issue.

[parzival1986]

@parzival1986 You have not installed all the files. See the Readme file and execute the respective commands.

Also

Please first install libusb_win32 driver from Zadig

You have not installed the libusb driver.

Follow THIS if you are having trouble.

You can close the issue.

I installed zadig but same. I will try the method in the link. i write result

[ansh-thecrazy]

after installing libusb_win32 driver from Zadig, I am getting error - "Python has stopped working"

@44yu5h Any idea?

[44yu5h]

@ansh-thecrazy I'm not sure but it shouldn't have been because of installing the drivers. Any other information displayed along with the error? You will have to check the logs to get some clue since this may happen due to several reasons. Are you on windows?

EDIT:

394 I can see you